+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12)
+--- Thread: peugeot 208 edc17c60 (/showthread.php?tid=71311)
peugeot 208 edc17c60 - tech111 - 09-11-2022
hello
can anyone help me eliminating adblue only from this ecu
thank you
RE: peugeot 208 edc17c60 - vwaraf - 09-11-2022
Hi
Davinci solution , pump and adblue module must disconected
RE: peugeot 208 edc17c60 - yomgui - 09-11-2022
(09-11-2022, 20:49 PM)tech111 Wrote: hello
can anyone help me eliminating adblue only from this ecu
thank you
Hi,
Try this. Normaly is ok with CheckSum in WinOls.
YomGui
Don't forget to send a "thanks" and a "repuation +++"
RE: peugeot 208 edc17c60 - tech111 - 09-11-2022
i tried a davinci solution before and it start few times and then no more starting , it was version 26 is yours newer ???
in fact i am looking for a tested good solution
RE: peugeot 208 edc17c60 - vwaraf - 09-11-2022
(09-11-2022, 21:53 PM)tech111 Wrote: i tried a davinci solution before and it start few times and then no more starting , it was version 26 is yours newer ???
in fact i am looking for a tested good solution
The latest original
Before programming, you should reset the parameters from adblue on the original file
Do as you like
![[Image: yes.gif]](https://cartechnology.co.uk/images/smilies/yes.gif)
RE: peugeot 208 edc17c60 - tech111 - 09-11-2022
i will reset adblue first remove connector and program yours ?
RE: peugeot 208 edc17c60 - vwaraf - 10-11-2022
Hi
I would reset first, then programmed and disconnected the plugs