Nissan Consult III+ Plus 46.11.00 + 46.20.00 + 46.30.00 - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: Renault - Dacia - Nissan - Infiniti (https://cartechnology.co.uk/forumdisplay.php?fid=57) +---- Thread: Nissan Consult III+ Plus 46.11.00 + 46.20.00 + 46.30.00 (/showthread.php?tid=7148) |
RE: Nissan Consult III+ Plus 46.11.00 + 46.20.00 + 46.30.00 - fraserauto - 08-06-2015 (07-06-2015, 21:15 PM)kerekt Wrote:<=> Please can some one remote my PC , i have tried but does not work swaped ini file no go . Thanks(02-06-2015, 20:43 PM)Legisin Wrote: Hi RE: Nissan Consult III+ Plus 46.11.00 + 46.20.00 + 46.30.00 - zuzuss - 08-06-2015 This will work with nissan consult 4? RE: Nissan Consult III+ Plus 46.11.00 + 46.20.00 + 46.30.00 - Inspector_Gadget - 08-06-2015 (08-06-2015, 10:06 AM)zuzuss Wrote: This will work with nissan consult 4? Consult 4 is clone consult 3 , it is same thing!! Consult III plus has j2534 implementation and has validated the same J2534 Tools as NER's with the same access authority of 1, In Which the VI is Included. VI2 has a different access authority of 2 the access determines the database use, this can be seen when you have used the soft by opening up the DiagnosticTool.ini file and looking at the [Tab index] it will be 1 if using passthru. Anyway back to your question. Yes your Consult 4 can work with PLUS Version but you will be limited to around 2012 vehicles and have same functions of standard consult 3, Mainly because you tool is not covering new protocol covered by the VI2 and Plus authority access. If you find an tool that covers all protocols and edit some files then the software can work well with Pass thru RE: Nissan Consult III+ Plus 46.11.00 + 46.20.00 + 46.30.00 - zuzuss - 11-06-2015 Can you help me to edit the files? thx RE: Nissan Consult III+ Plus 46.11.00 + 46.20.00 + 46.30.00 - Inspector_Gadget - 11-06-2015 (11-06-2015, 08:24 AM)zuzuss Wrote: Can you help me to edit the files? thx Why, Do you have interface that cover all protocol ? RE: Nissan Consult III+ Plus 46.11.00 + 46.20.00 + 46.30.00 - zuzuss - 11-06-2015 How to test? i make inside picture... RE: Nissan Consult III+ Plus 46.11.00 + 46.20.00 + 46.30.00 - Inspector_Gadget - 11-06-2015 (11-06-2015, 11:26 AM)zuzuss Wrote: How to test? i make inside picture... mate read what I wrote above . your interface don't work with Consult 3 Plus, well it does but not full coverage, Only the same as consult 3 so why not just use consult 3 RE: Nissan Consult III+ Plus 46.11.00 + 46.20.00 + 46.30.00 - IM6 - 16-06-2015 IF you want to use it as "Generic" PassThru (J2534) VCI, You need To Replace "DiagnosticTool.ini" replace the file in which maybe someone will give path tx RE: Nissan Consult III+ Plus 46.11.00 + 46.20.00 + 46.30.00 - hamzadaw2000 - 11-07-2015 Hello. Abritus just relased a new update for passthru for Nissan, any body tried? RE: Nissan Consult III+ Plus 46.11.00 + 46.20.00 + 46.30.00 - bigpimpingdave - 13-07-2015 I keep on getting an error at the very end saying the " wizard was interrupted before consult 3 plus could be installed" I am installing this on a window's 8 labtop and I set the software run under "xp sp3" compatibility. What am I doing wrong? Also does anyone have an install docs? |