NAVI CODE from DUMP FIS - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: CARRADIO / NAVIGATION (https://cartechnology.co.uk/forumdisplay.php?fid=14) +--- Thread: NAVI CODE from DUMP FIS (/showthread.php?tid=7159) |
NAVI CODE from DUMP FIS - volavka - 17-05-2015 Hello to all RadioDecoders & CarTechnoloGY Members IF You need Radio Code from NAVI (vw audi skoda Seat) just post Your DUMP FIS Here!, then you will get code quickly For Read FIS You Can use famous universal Programmers such as carprog xprog,upa-usb ponyprog....etc You Can Find Here instruction >> (How to Read FIS Module)<< By Mr.Bonus after read ,juts post Your Dump or know lines Where Stored encrypted Code To get quickly code P.S Before Entre The Code Make Sure 1: The Programmer is Disconnected From Radio, if Not (in this case, any code is not working!) 2: The Power Connected To Radio (should be Three positive+ & One GND-) happy music & enjooooy! RE: NAVI CODE from DUMP FIS - pilif - 22-05-2015 Hi lads. I need a code for this navi. Thanks a lot. P.S. 24c32 RE: NAVI CODE from DUMP FIS - bogege - 22-05-2015 (22-05-2015, 14:35 PM)pilif Wrote: Hi lads. try code 1517 RE: NAVI CODE from DUMP FIS - pilif - 22-05-2015 Hi again. i am encountering a problem. I just wanted to read and verify again and now i am reading just zero's. i did all just last the last time. what can be ? RE: NAVI CODE from DUMP FIS - pilif - 23-05-2015 (22-05-2015, 17:26 PM)bogege Wrote: try code 1517 Hi again I have tryied the code but he says that it is not good. When i try another one the radio locks. When i remove the power source and i am putting back again it is not locked and i can enter the code freely. Normal it was to wait one hour to unlock but i can do that right after the power connection. What did i do wrong ? Or what's happening? RE: NAVI CODE from DUMP FIS - bogege - 23-05-2015 (23-05-2015, 14:52 PM)pilif Wrote:(22-05-2015, 17:26 PM)bogege Wrote: try code 1517 Quote:Before Entre The Code Make Sure under Hi, contact pin safe to +12V.!!!!!!!!!! 3x+12v.!!!!!!! RE: NAVI CODE from DUMP FIS - pilif - 23-05-2015 I already did that. And now i am reading just FF's . What could it be? The FIS modul can be brocken in this opperation? RE: NAVI CODE from DUMP FIS - bogege - 23-05-2015 (23-05-2015, 17:17 PM)pilif Wrote: I already did that. And now i am reading just FF's . Everything is possible, the radio is in you, friend! If you are convinced that so-last option is .............. I hope you're wrong somewhere! RE: NAVI CODE from DUMP FIS - pilif - 23-05-2015 Well... Funk !!! In this photo looks so huge... but in there... oooh God, i need to be an ant . I am pretty sure that i cant do that... it's not humane. I will come whit an update. RE: NAVI CODE from DUMP FIS - bogege - 23-05-2015 There is no need to do this if it is absolutely necessary! |