+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: VAG Group (VW - Audi - Seat - Skoda - Bentley) (https://cartechnology.co.uk/forumdisplay.php?fid=55)
+---- Thread: ODIS ENGINERIING PROBLEM DURING INSTALLATION (/showthread.php?tid=71627)
Pages:
1
2
ODIS ENGINERIING PROBLEM DURING INSTALLATION - psalva18 - 17-11-2022
Hello ... I'm installing ODIS ENGINERIING Rel. 15 on a vas 6150C.
I launched the installer and it's about 1h 30min. that on the PC the situation is the one described in the image file that I have attached.
Can anyone answer me?
The SO it's Windows 11 PROF. installed on a vas 6150C.
CPU i5 RAM 4GB HD SSD 256GB
WIndows Defender disabled
RE: ODIS ENGINERIING PROBLEM DURING INSTALLATION - justdiag - 17-11-2022
your system hangs on some dependency. My advice cancel all , delete remaining folders and temp files with a program like ccleaner, reboot your system and since you have w11 do make install in compatibility mode as w10 and run as admin the setup file.
Do the same as here also for your setup files:
![[Image: Compatibility-W10.jpg]](https://i.postimg.cc/Jz3DSLGH/Compatibility-W10.jpg)
RE: ODIS ENGINERIING PROBLEM DURING INSTALLATION - psalva18 - 17-11-2022
Thanks mr. justdiag, I will try to execute his instructions. I will let you know
Best regards
RE: ODIS ENGINERIING PROBLEM DURING INSTALLATION - psalva18 - 17-11-2022
(17-11-2022, 14:03 PM)justdiag Wrote: your system hangs on some dependency. My advice cancel all , delete remaining folders and temp files with a program like ccleaner, reboot your system and since you have w11 do make install in compatibility mode as w10 and run as admin the setup file.
Do the same as here also for your setup files:
Good evening Mr Justdiag
the only possible choices for the compatibility modes are:
1 windows 8
2 windows 7 74 bit
2 windows vista
it is not possible to select, as it is not possible to choose it, the windows 10 mode
Best regards
RE: ODIS ENGINERIING PROBLEM DURING INSTALLATION - justdiag - 17-11-2022
if you are on w10 then you do not have the option. in this case just run the program as administrator.
RE: ODIS ENGINERIING PROBLEM DURING INSTALLATION - psalva18 - 17-11-2022
(17-11-2022, 16:30 PM)justdiag Wrote: if you are on w10 then you do not have the option. in this case just run the program as administrator.
The Operating System installed on the VAS 6150C is Windows 11 Prof., as you can verify from the attached file.
I am also sending you the screenshot of the possible choices that the Operating System allows you to make, when you have to decide the compatibility mode for running the program.
Best regards
RE: ODIS ENGINERIING PROBLEM DURING INSTALLATION - vagvag - 17-11-2022
These are not Windows 11 i think....... They are Windows 10 and just modded viewing to looks somehow like Windows 11!!!!!!!!
![[Image: aetsch.gif]](https://cartechnology.co.uk/images/smilies/aetsch.gif)
Regarts...........
RE: ODIS ENGINERIING PROBLEM DURING INSTALLATION - Ocis - 17-11-2022
I had exactly the same problem,
I think it is due to the last Windows update 2H22.
I had reset my Windows,
and then the installation went through completely.
It hangs during the driver installation.
RE: ODIS ENGINERIING PROBLEM DURING INSTALLATION - psalva18 - 18-11-2022
(17-11-2022, 20:02 PM)Ocis Wrote: I had exactly the same problem,
I think it is due to the last Windows update 2H22.
I had reset my Windows,
and then the installation went through completely.
It hangs during the driver installation.
I also noticed that it crashes when installing the drivers. I think it's the latest Windows 11 update.
Is it therefore necessary to install Windows 10?
Sorry OCIS, when you say you've reset Windows, what do you mean?
What did you install WINDOWS11 without the 2H22 update?
(18-11-2022, 07:47 AM)psalva18 Wrote:(17-11-2022, 20:02 PM)Ocis Wrote: I had exactly the same problem,
I think it is due to the last Windows update 2H22.
I had reset my Windows,
and then the installation went through completely.
It hangs during the driver installation.
I also noticed that it crashes when installing the drivers. I think it's the latest Windows 11 update.
Is it therefore necessary to install Windows 10?
Sorry OCIS, when you say you've reset Windows, what do you mean?
What did you install WINDOWS11 without the 2H22 update?
Attached is the situation after a night of running the program installation phase
RE: ODIS ENGINERIING PROBLEM DURING INSTALLATION - fantomel - 18-11-2022
reset his windows means restore from recovery partition. that install is stuck so better to find the log and see where it's stuck or as our colegue did , restore from recovery or reinstall.