+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: Solved ✔ F01 adaptive lci headlights retrofit (/showthread.php?tid=72291)
F01 adaptive lci headlights retrofit - XALLECS - 03-12-2022
Hello there dear friends, i just end an retrofit for lci adaptive headlights in a bmw f01(f02) in fact 2010
--istall the new headlights , made the wire setup for the 30F and Kcan3 also lin buss etc etc
--exchange FRM from 2014 f01 for correct string in coding LCI
--echange ZGW to a new ZGW-02 high plus, the car keep the original CIC
-- change biuld date from an lci
-- coding done everything ok all is function corectly.
EXCEPT this new problems apeared afther the setup
High beam assis not function at all (car has Kafas1 instaled from factory)
None of the interior lighs not function fzd for sunroof working ok but none of the lights from it is not light not on toch not on even open doors ..
with the old setup all was functin ok .
Any help will be apreacited
p.s all wire check ok all fuse check ok so i bet must be something from encoding etc ..
RE: F01 adaptive lci headlights retrofit - Loliceman - 03-12-2022
(03-12-2022, 13:16 PM)XALLECS Wrote: Hello there dear friends, i just end an retrofit for lci adaptive headlights in a bmw f01(f02) in fact 2010
--istall the new headlights , made the wire setup for the 30F and Kcan3 also lin buss etc etc
--exchange FRM from 2014 f01 for correct string in coding LCI
--echange ZGW to a new ZGW-02 high plus, the car keep the original CIC
-- change biuld date from an lci
-- coding done everything ok all is function corectly.
EXCEPT this new problems apeared afther the setup
High beam assis not function at all (car has Kafas1 instaled from factory)
None of the interior lighs not function fzd for sunroof working ok but none of the lights from it is not light not on toch not on even open doors ..
with the old setup all was functin ok .
Any help will be apreacited
p.s all wire check ok all fuse check ok so i bet must be something from encoding etc ..
I did this retrofit and had the exact same problem as you did.
One question, do you have a fault for MSA supply 12v short circuit in FRM?
Then your solution is simple, check power supply wiring to FRM. Add one 12v I think it was pin 1 or 2. Voila!
Check this picture
RE: F01 adaptive lci headlights retrofit - XALLECS - 03-12-2022
Thats was a gift from God!!!!
thank you my friend ..... that was the resolve to my problem !!!!