BMW ISTA-P 3.55.0.300 + 3.55.1.001 + 3.55.2.001 + 3.55.3.001 + 3.55.4.000 - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: BMW ISTA-P 3.55.0.300 + 3.55.1.001 + 3.55.2.001 + 3.55.3.001 + 3.55.4.000 (/showthread.php?tid=7239) |
BMW ISTA-P 3.55.0.300 + 3.55.1.001 + 3.55.2.001 + 3.55.3.001 + 3.55.4.000 - E46-Cabrio - 20-05-2015 Here are the following files, - BMW_ISPI_ISTA-P_SYS_3.55.0.300 - 31.00 GB - BMW_ISPI_ISTA-P_SYS_3.55.1.001 - 886.4 MB - BMW_ISPI_ISTA-P_SYS_3.55.2.001 - 294.3 MB - BMW_ISPI_ISTA-P_SYS_3.55.3.001 - 509.2 MB - BMW_ISPI_ISTA-P_SYS_3.55.4.000 - 87.0 MB - Including .reg file for BMW_ISPI_ISTA-P_SYS_3.55.4.000 - MegaDownloader to download the files from MEGA RE: BMW ISTA-P 3.55.0.300 + 3.55.1.001 + 3.55.2.001 + 3.55.3.001 + 3.55.4.000 - berniw - 22-05-2015 Trying to update ISTA/P with BMW_ISPI_ISTA-P_SYS_3.55.1.001 msi and DAT files. From version ISTA/P 3.55.0.300 but when install reaches end it starts to ROLL BACK. After rolling back it gives error " Setup Wizard ended prematurely because of an error. ... ". Any hep appreciated. Thanks. RE: BMW ISTA-P 3.55.0.300 + 3.55.1.001 + 3.55.2.001 + 3.55.3.001 + 3.55.4.000 - SweetBMW - 23-05-2015 I upgraded from version 3.55.1.001 to 2.001. When trying to install 3.001 it says basic version of ista not found. Any ideas?? RE: BMW ISTA-P 3.55.0.300 + 3.55.1.001 + 3.55.2.001 + 3.55.3.001 + 3.55.4.000 - KaiO - 23-05-2015 Did you start ISTA between the two versions with the loader? If so, the loader changes files in the installation folder, so ISTA notices that and gives out this error. Solution: back up your installation in case you want to update later In your case it's the best to start all over new with basic installation version and update without starting ISTA in between RE: BMW ISTA-P 3.55.0.300 + 3.55.1.001 + 3.55.2.001 + 3.55.3.001 + 3.55.4.000 - beemered - 23-05-2015 (23-05-2015, 14:09 PM)KaiO Wrote: Did you start ISTA between the two versions with the loader? Before update, replace this file with the original: C:\ProgramData\BMW\ISPI\data\TRIC\ISTA-P\BMW\DataProcurement\cfg\ApplicationConfig.xml Original file: C:\Users\your_username\AppData\Roaming\BMW Group\BMW ISTA-P Loader V3.2\3.2.0.0\latest_version\Dataprocurment\BMW\DataProcurement\cfg\ApplicationConfig.xml RE: BMW ISTA-P 3.55.0.300 + 3.55.1.001 + 3.55.2.001 + 3.55.3.001 + 3.55.4.000 - berniw - 23-05-2015 Thanks for replies , just trying the replace original file option and will see if it installs now without rolling back. RE: BMW ISTA-P 3.55.0.300 + 3.55.1.001 + 3.55.2.001 + 3.55.3.001 + 3.55.4.000 - umutbulut - 24-05-2015 Just tried this option: Works perfect, thanks! BMW ISTA-P 3.55.0.300 + 3.55.1.001 + 3.55.2.001 + 3.55.3.001 + 3.55.4.000 - berniw - 24-05-2015 I've tried it, doesn't work for me, I think I might got the original and the other wrong way round. Which one is to changed ?. Sent from my iPhone using Tapatalk RE: BMW ISTA-P 3.55.0.300 + 3.55.1.001 + 3.55.2.001 + 3.55.3.001 + 3.55.4.000 - umutbulut - 24-05-2015 Copy the original file C:\Users\your_username\AppData\Roaming\BMW Group\BMW ISTA-P Loader V3.2\3.2.0.0\latest_version\Dataprocurment\BMW\DataProcurement\cfg\ApplicationConfig.xml to C:\ProgramData\BMW\ISPI\data\TRIC\ISTA-P\BMW\DataProcurement\cfg\ApplicationConfig.xml This worked for me. RE: BMW ISTA-P 3.55.0.300 + 3.55.1.001 + 3.55.2.001 + 3.55.3.001 + 3.55.4.000 - KaiO - 24-05-2015 For me it didn't work either. So best is to start all over new without starting ISTA in between, as I posted earlier. |