G30 6WB Strange issue - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: G30 6WB Strange issue (/showthread.php?tid=72540) |
G30 6WB Strange issue - Chillmeister - 11-12-2022 Hi, I‘m facing a strange issue with a Dkombi2 G30 6WB. It runs perfectly on swfl 004.040.011 but stays black with swfl 005.010.007. With both i steps it is fully answering in esys and i can flash and code whatever i want. Only issue is Display stays black with newest istep. Does somebody had a similar situation and maybe Solution to fix this? Thanks and best regards RE: G30 6WB Strange issue - LeonidLunin - 12-12-2022 005.010.007 - which Ilevel? RE: G30 6WB Strange issue - Chillmeister - 12-12-2022 I Step 22-11-540 RE: G30 6WB Strange issue - Chillmeister - 12-12-2022 Today i found out it could be Eeprom related error. Played with stored km in Eeprom and if i put 500km on Eeprom, Tool32 shows 496km which is ok. But if I press Button on Kombi it only shows 241km which i think is too much difference. Can somebody confirm it is normal and if Eeprom Data is also changed by flashing? If so it seems that Eeprom is corrupted and because of this i-Level Update doesn't work Thanks for any help RE: G30 6WB Strange issue - m5proud - 29-12-2022 does eeprom soldered properly? RE: G30 6WB Strange issue - Chillmeister - 31-12-2022 (29-12-2022, 18:54 PM)m5proud Wrote: does eeprom soldered properly? thanks for responding Yes Eeprom soldered 100%. I desoldered NOR Flash and dumped it while waiting (for approx. 6 Month) for new one being delivered. Than will reflash, resolder and see what happens... |