Solved ✔ Problem coding ABG Mini R50 - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: Solved ✔ Problem coding ABG Mini R50 (/showthread.php?tid=72626) |
Problem coding ABG Mini R50 - BB-Driver - 13-12-2022 Hey guy’s I have problems to code the ABG module on MINI R50’s I use icom latest Daten an NCS V4.0.1 Also i use ncs dummy. I can read the module but can’t code it with individual parameters like seat mat and so on. If FSW_PSW.MAN is empty I can code it. What profile I need to use for R50 ABG coding? If I use expert profile I can code it with manipulated MAN but codings won’t stay. RE: Problem coding ABG Mini R50 - gfriedrichi - 14-12-2022 Have you changed only OC3_1 or also tried to edit/write another parameter ? Usually this message happens when i try to write some item that is not acceptable RE: Problem coding ABG Mini R50 - rana - 14-12-2022 share the file i can check RE: Problem coding ABG Mini R50 - Emelint - 14-12-2022 Give your TRC file for checking. But really looks that you didn't fully changed all parameters. If you want disable pasanger detection sensor, you need: 1. Unplug seat sensor; 2. Change in MRS5 this parameters: 2a. OC3_1 to nicht_aktiv; 2b. GK/OC3/POL_1 to nicht_aktiv; 2c. OC3_2 to nicht_aktiv; 2b. GK/OC3/POL_2 to nicht_aktiv; 3. Clear DTC. RE: Problem coding ABG Mini R50 - BB-Driver - 14-12-2022 I want to code Sport seats. Everything is unplugged. I coded many sport seats in e and f models there are no problems in coding. I will sent trc file soon. (14-12-2022, 00:03 AM)gfriedrichi Wrote: Have you changed only OC3_1 or also tried to edit/write another parameter ? i changed GURTSTRAFFER_FAHRER_1 GURTSTRAFFER_BEIFAHRER_1 SIDEBAG_LINKS_1 SIDEBAG_RECHTS_1 GURTKONTAKT_FAHRER_1 GURTKONTAKT_BEIFAHRER_1 OC3_1 everything to nicht_aktiv RE: Problem coding ABG Mini R50 - Emelint - 14-12-2022 (14-12-2022, 14:57 PM)BB-Driver Wrote: I want to code Sport seats. Everything is unplugged. I coded many sport seats in e and f models there are no problems in coding.How i said, not all parameters. Need also change this GK/OC3/POL_1 to nicht_aktiv; OC3_2 to nicht_aktiv; GK/OC3/POL_2 to nicht_aktiv and all will be fine. At least your OC3_1 nicht+aktiv and GK/OC3/POL_1 aktiv have confliction. RE: Problem coding ABG Mini R50 - BB-Driver - 14-12-2022 Thank you very much Emelint GURTSTRAFFER_FAHRER_1 GURTSTRAFFER_FAHRER_2 GURTSTRAFFER_BEIFAHRER_1 GURTSTRAFFER_BEIFAHRER_2 GURTKONTAKT_FAHRER_1 GURTKONTAKT_FAHRER_2 GURTKONTAKT_BEIFAHRER_1 GURTKONTAKT_BEIFAHRER_2 GK/OC3/POL_1 GK/OC3/POL_2 OC3_1 Set all to nicht_aktiv and now everyting is fine. Seems that parameters on R50 ABG are often twice and seat mat must be deaktivated in 3 parts. Today i learned something new Thanks for the great support here guys |