+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: File .bin 6wb F26 (/showthread.php?tid=73104)
Pages:
1
2
File .bin 6wb F26 - santopalermo - 27-12-2022
Hi all does anyone have the file of a 6wb origin f15 or f16? I have to retrofit 6wb on f26 but I can not read m35160wt original the file seems corrupt, I bought cgpro but reading m35160wt something does not convince me in the file
RE: File .bin 6wb F26 - andriusx - 27-12-2022
(27-12-2022, 15:29 PM)santopalermo Wrote: Hi all does anyone have the file of a 6wb origin f15 or f16? I have to retrofit 6wb on f26 but I can not read m35160wt original the file seems corrupt, I bought cgpro but reading m35160wt something does not convince me in the file
Hi here is from f16 6wb with hud
RE: File .bin 6wb F26 - xiaokewu - 28-12-2022
(27-12-2022, 16:55 PM)andriusx Wrote:(27-12-2022, 15:29 PM)santopalermo Wrote: Hi all does anyone have the file of a 6wb origin f15 or f16? I have to retrofit 6wb on f26 but I can not read m35160wt original the file seems corrupt, I bought cgpro but reading m35160wt something does not convince me in the file
Hi here is from f16 6wb with hud
Excuse me do you have F10 6wb data？
RE: File .bin 6wb F26 - andriusx - 28-12-2022
(28-12-2022, 03:31 AM)xiaokewu Wrote:(27-12-2022, 16:55 PM)andriusx Wrote:(27-12-2022, 15:29 PM)santopalermo Wrote: Hi all does anyone have the file of a 6wb origin f15 or f16? I have to retrofit 6wb on f26 but I can not read m35160wt original the file seems corrupt, I bought cgpro but reading m35160wt something does not convince me in the file
Hi here is from f16 6wb with hud
Excuse me do you have F10 6wb data？
Here it is from an F10 6WB data
RE: File .bin 6wb F26 - santopalermo - 28-12-2022
I can not understand what the problem is I zeroed vin_FF the Km I lowered them to 16 with CG Pro, no error in writing or reading, when I feed it at the counter it marks me km 0, if I connect it in the car it marks me the real km when I go to encode it gives me error and does not encode
RE: File .bin 6wb F26 - gfriedrichi - 28-12-2022
(28-12-2022, 13:29 PM)santopalermo Wrote: I can not understand what the problem is I zeroed vin_FF the Km I lowered them to 16 with CG Pro, no error in writing or reading, when I feed it at the counter it marks me km 0, if I connect it in the car it marks me the real km when I go to encode it gives me error and does not encode
6wb needs vin change 95320 not only 35160
RE: File .bin 6wb F26 - santopalermo - 28-12-2022
(28-12-2022, 13:57 PM) gfriedrichi Wrote:(28-12-2022, 13:29 PM)santopalermo Wrote: I can not understand what the problem is I zeroed vin_FF the Km I lowered them to 16 with CG Pro, no error in writing or reading, when I feed it at the counter it marks me km 0, if I connect it in the car it marks me the real km when I go to encode it gives me error and does not encode
6wb needs vin change 95320 not only 35160
did that too
RE: File .bin 6wb F26 - andriusx - 28-12-2022
(28-12-2022, 13:29 PM)santopalermo Wrote: I can not understand what the problem is I zeroed vin_FF the Km I lowered them to 16 with CG Pro, no error in writing or reading, when I feed it at the counter it marks me km 0, if I connect it in the car it marks me the real km when I go to encode it gives me error and does not encode
Check the soldering of the eeprom, If you have lowered mileage to 16km and on bench it showing 0km something is wrong, On bench it should show 16km as well not 0.
RE: File .bin 6wb F26 - BMWzone - 28-12-2022
16 Km it's right and equal to 0 to code used Kombi, CGPro reset minimun at 16 Km.
I never reset 95320 in all kombi's Fxx and first versions of Gxx (no virtual) except 6WB F3x (which I mount new) and never any red dot.
Coding with esys 6WB on F25/F26 requires more care
RE: File .bin 6wb F26 - santopalermo - 28-12-2022
I use an F of f16 but it doesn't work