+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: G12 2022 headlight programming (/showthread.php?tid=73109)
Pages:
1
2
G12 2022 headlight programming - tigri007 - 27-12-2022
Dear friends,
I have a problem trying to program new headlight module. Flash is always interrupted with this error:
<[] prepareTALExecution finished [PROGRESS]>
<[] prepareVehicleForFlash started [PROGRESS]>
<MCDDiagService<id=20600, job=com.bmw.psdz.jobs.common.MCD3_PrepareVehicleForFlash, service=CC, description=error: negative response : conditionsNotCorrect, link=#RtGen_MultipleEcuJob_LogicalLink> [DIAGSERVICE]>
<MCDDiagService<id=76600, job=com.bmw.psdz.jobs.common.MCD3_PrepareVehicleForFlash, service=RC_SEM, description=error: negative response : conditionsNotCorrect, link=#RtGen_MultipleEcuJob_LogicalLink> [DIAGSERVICE]>
<[FLM2 - 44] Failed ProgrammingPrecondition ECUId:FLM2_0x44 error ID:192 - supplier reserved [THROWABLE]>
<[] prepareVehicleForFlash finished [PROGRESS]>
<[] finalizeVehicleFlash started [PROGRESS]>
<[] finalizeVehicleFlash finished [PROGRESS]>
<[] prepareVehicleForCoding started [PROGRESS]>
<[] prepareVehicleForCoding finished [PROGRESS]>
Thank you in advance
RE: G12 2022 headlight programming - elthox - 27-12-2022
What faults are in car? Does headlight work?
RE: G12 2022 headlight programming - tigri007 - 27-12-2022
There are no errors. FLER is green. Can be coded, but cannot be flashed. Low beam high beam work but halo rings dont work. And no error.
RE: G12 2022 headlight programming - Node - 27-12-2022
Have you activated diagnostic mode in a car? (3x start-stop button within couple s)
RE: G12 2022 headlight programming - tigri007 - 27-12-2022
yes tried both modes, with diagnosis mode and car running
RE: G12 2022 headlight programming - TheNine90 - 28-12-2022
Which Esys verson is this?
RE: G12 2022 headlight programming - tigri007 - 28-12-2022
i tried esys last version 22.10 with 4.39.20 data and esys 3.36 with 4.36.10 data. Same error.
RE: G12 2022 headlight programming - TheNine90 - 28-12-2022
Try deactivating parallel programming and uncheck programming counter.
Why are you programming the module? If you coding works then teach-in the headlight using ISTA in service function.
RE: G12 2022 headlight programming - tigri007 - 28-12-2022
I never used teach procedure for FLM2. Never was needed. Coding and matrix code input has been enough. I try to flash because there is no coding error or any other error.
RE: G12 2022 headlight programming - Abou Jambo - 29-12-2022
(27-12-2022, 20:19 PM)tigri007 Wrote: yes tried both modes, with diagnosis mode and car running
Which ISTEP you are using for TAL calculation?