CarTechnoloGY
Rem short circuit problem F30 - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: Rem short circuit problem F30 (/showthread.php?tid=73265)

Pages: 1 2 3


Rem short circuit problem F30 - amine0xff - 31-12-2022

Hello.
I have f30 2012 .no brake light 
When I scan I get 

FRM/TSGFA (Rear electronic module): 
Error code: 804875
One or several outputs have exceeded the approved number of short-circuit cycles ( encodable), Fault currently present

And when I calculate test plan with ista and finish it 
It detect like this:

The output disabled due to short-circuits can no longer be enabled:

• Side lights, rear right 2
The REM control unit must be replaced. 

When I remove A174-12B left brake light works
Also I test with multimeter .and there are no short to ground. 
I tried  to code rem again. And nothing


RE: Rem short circuit problem F30 - ____ANGEL___ - 31-12-2022

There is a defect in that circuit. Too many amps are measured on that output pin from the rem. Try to reset the short circuit protection with tool32 but before you've to find the issue. If you can't find anything, then the rem is defective. Also the rear headlight can be faulty and draw too many amps, or wrong lamps installed.


RE: Rem short circuit problem F30 - juantg93 - 01-01-2023

With bimmerlink or bimmertools you can reset counter


RE: Rem short circuit problem F30 - Tracshan - 01-01-2023

You said there are no short to ground, but there could be short to some other wire. Not only that, I am trying to remember, if I remember correctly, those taillights have some metal strip on the light assembly itself. Nonetheless, double check wires before concluding the REM is the issue. Recoding won't help if the short circuit really still exists. Also check the bulb itself.


RE: Rem short circuit problem F30 - amine0xff - 01-01-2023

Thank you for replying.
I got the error without putting any lamp in right tail
.
Also I have other errors about short circuit for windows motor
It can be the responsibility of that ?


RE: Rem short circuit problem F30 - aejanow - 01-01-2023

plug out the lamp outputs at the same rem, you can find the diagram on newtis.


RE: Rem short circuit problem F30 - Tracshan - 02-01-2023

You definitely need diagram. Can you post a scan report with all the errors you are getting?


RE: Rem short circuit problem F30 - Levanime - 02-01-2023

you cant reset short circuit counter in REM with public prgs
so I guess its replacement only


RE: Rem short circuit problem F30 - amine0xff - 02-01-2023

(02-01-2023, 03:48 AM)Tracshan Wrote:  You definitely need diagram. Can you post a scan report with all the errors you are getting?

Here 
Notes_221203_221246.pdf
File Type: .pdf
Downloaded: 39 times
Size: 4.13 MB




RE: Rem short circuit problem F30 - megalo84 - 04-01-2023

hello, if you have an enet cable I can try to reset the short circuits remotely