+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: Solved ✔ e70 parking brake EMF coding (/showthread.php?tid=73418)
e70 parking brake EMF coding - bmw335d - 04-01-2023
Hey Guys,
I am trying to code a new parking brake on a 2013 E70 and am getting ECU Does not answer COAPI-2020: IFH-0009 when trying to factory code in NCS.
in ista+ i can see the module and reset any errors but i am unable to code it in NCS and in INPA i also get no resposne from ECU.
Can anyone advise what the correct procedure is to code a new EMF module and how to fix the communication error in NCS expert?
Thanks
RE: e70 parking brake EMF coding - bboctavian - 04-01-2023
Hey, with winkfp make a flash with the vin nr.
RE: e70 parking brake EMF coding - bmw335d - 05-01-2023
any detailed instructions?
RE: e70 parking brake EMF coding - hashtagmaster - 05-01-2023
(05-01-2023, 00:55 AM)bmw335d Wrote: any detailed instructions?
look at this site - you problem ist a error connection
RE: e70 parking brake EMF coding - bmw335d - 05-01-2023
(05-01-2023, 08:00 AM)hashtagmaster Wrote:(05-01-2023, 00:55 AM)bmw335d Wrote: any detailed instructions?
look at this site - you problem ist a error connection
but if all other modules in the car work without issue, meaning i can read and code them, then really it should not be a connection issue right?
RE: e70 parking brake EMF coding - e36freak - 05-01-2023
How is the wiring harness near the module? The harness can get damaged right near the connector
RE: e70 parking brake EMF coding - Duken - 07-01-2023
If diagnostic works, coding must work too.
RE: e70 parking brake EMF coding - bmw335d - 08-01-2023
Thanks everyone for your feedback, turns out the "new" aftermarket EMF was the issue. We plugged the old one in to test and there was no issue with communication.
Good idea if buying aftermarket is to plug it in and try to code before going through all the labor to replace.