Need connection diagram FL3T-14B321-BD ford - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: AIRBAG (https://cartechnology.co.uk/forumdisplay.php?fid=13) +--- Thread: Need connection diagram FL3T-14B321-BD ford (/showthread.php?tid=73573) |
Need connection diagram FL3T-14B321-BD ford - NickMayer - 09-01-2023 Hi , someone before me clean it already with wrong dump I believe. No errors but yellow airbag sing on dash , not red . Infineon xc2336a FL3T-14B321-BD Does anyone have connection diagram Thx Attached pics of module RE: Need connection diagram FL3T-14B321-BD ford - NickMayer - 09-01-2023 Anyone has jtag connection for it ? RE: Need connection diagram FL3T-14B321-BD ford - al70 - 09-01-2023 I found this in iprog, not sure if connections are the same on your module RE: Need connection diagram FL3T-14B321-BD ford - NickMayer - 09-01-2023 I have prog clone , will try not sure if can because someone kill it before me with wrong dump , but thx try it anyway RE: Need connection diagram FL3T-14B321-BD ford - number7 - 09-01-2023 as You wish... done by me RE: Need connection diagram FL3T-14B321-BD ford - NickMayer - 09-01-2023 I’ll try not sure will work , I need to find connection point to TRST . I believe your diagram for SMOK, I have vvdi prog On your diagram It has VCC red ,Ground-black ,reset -blue , txd- gray , rxd - yellow , but for vvdi prog I also need TRST RE: Need connection diagram FL3T-14B321-BD ford - NickMayer - 14-01-2023 Does anyone has can pins for this module ? |