+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12)
+--- Thread: Map Help audi (/showthread.php?tid=73934)
Map Help audi - opelomega3000 - 17-01-2023
Hello, i try to map my audi, checksum error shows up im trying to op load fil.
can someone check my org fil and steg 1or2 and hardcut that?
![[Image: cheers.gif]](https://cartechnology.co.uk/images/smilies/cheers.gif)
![[Image: biggrin.gif]](https://cartechnology.co.uk/images/smilies/biggrin.gif)
RE: Map Help audi - mbectb - 18-01-2023
Is it for C7 2.0TDI ? If so hardcut on EDC17C46 causes glow plug flashing and checksum error... You can try achieve it via modification to Nm2iQ maps....
RE: Map Help audi - zapdus - 18-01-2023
(18-01-2023, 00:38 AM)mbectb Wrote: Is it for C7 2.0TDI ? If so hardcut on EDC17C46 causes glow plug flashing and checksum error... You can try achieve it via modification to Nm2iQ maps....
Hi
There is no problem with this ECU hardcut, there is single value rev limiter SVRL
I did few cars this way, DPF, EGR OFF, hotstart, downgrade to pre-diesel gate, and stage 1, I have dyno from ibiza 2.0 TDI 143 -> 195hp
If you have checksum error, then your files is wrong, you can check the link on this forum