CarTechnoloGY
TOOL READ EPROM 95x - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: TOOL READ EPROM 95x (/showthread.php?tid=74455)

TOOL READ EPROM 95x - A-BAYERS - 29-01-2023

Hi

I am looking for a tool for reading/writing eprom 95320.
Do you have any suggestions?

This to make immo off on EDC16C36 renault master.

Thanks!

RE: TOOL READ EPROM 95x - canisha - 29-01-2023

Almost every programmer reads and writes it,uupa ,xprog,orange,elnec ,original and clone...

RE: TOOL READ EPROM 95x - A-BAYERS - 29-01-2023

Thank you canisha for your sharing.
I use Windows 10, would one of these tools/programs be more suitable for this operating system?

RE: TOOL READ EPROM 95x - volavka - 30-01-2023

Hi mate 
you are looking for the programmer it's okay but immo off not exist yet for this ECU [Image: yikes.gif]

Br.V

RE: TOOL READ EPROM 95x - A-BAYERS - 30-01-2023

thank you for the info, I think to make virgin or emulator.

RE: TOOL READ EPROM 95x - ady2006 - 01-02-2023

In my opinion, if you don't hawe any memory programmer, best deal is xgecu TL866-II plus. Cheap, simple to use, constantly update. Work on win 10.

RE: TOOL READ EPROM 95x - carmansk - 02-02-2023

exactly
I own several programmers such as - xprog-m_ori, beeprog_ori, orange_ori, upa and the like, but I prefer xgecu TL866-II plus to read eeprom.

RE: TOOL READ EPROM 95x - eliah - 02-02-2023

(29-01-2023, 19:21 PM)A-BAYERS Wrote:  Hi

I am looking for a tool for reading/writing eprom 95320.
Do you have any suggestions?

This to make immo off on EDC16C36 renault master.

Thanks!

a god prrogramer is CH341A for 24c and 95c and 93c the price is ridiculos low

RE: TOOL READ EPROM 95x - A-BAYERS - 02-02-2023

Thank you very much for your feedback! It's very nice!
Before ordering a new tool I read via ktag (bdm) reading is okay only one thing bothers me is that the protocol eprom (P69) is an ST95640 when in reality it is an ST95320.
Does it affect read or write?
I attach the file, if someone wants to take a look at it to virginize this one. (eeprom / flash and full backup)
As said above it would be to stop the immobilizer of the vehicle, this one blocks the starting of the vehicle from time to time.
I am interested in advice if a particular procedure to follow after viginization of the eprom.
Thanks again.