w211 Lambda change - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12) +--- Thread: w211 Lambda change (/showthread.php?tid=75360) |
w211 Lambda change - ikrom - 18-02-2023 Hi there I've changed my ori Bosch LSU to new one, it is NGK. Both has 6 connecting pins, 5-wires. But colours are not even close... I have cutted both, and reconnected as by this picture....attached. Now sometimes im getting check on, and stored dtc - o2 shorted to groud. This dtc always stored and deleting, but after some starts its is showing up again. Maybe I connect somthing wrong ? BTW : My car was about a week in garage and battery slighly got low, and also this work was done with battery disconnected. After I connect and these days driving, my cooling fan ALWAYS ON for half power. Always. As I get on KL15 - It is running. Maybe something dtcs removes I need? codings maybe somewhere lost ? PS : changed K-KLA function of warm countries (deactivated faning motor) & putted fan min to 25% (no vatiants lower, only 25/40 ). But it didn't solved |