+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: CARRADIO / NAVIGATION (https://cartechnology.co.uk/forumdisplay.php?fid=14)
+--- Thread: Need help recovering a crashed Mini Cooper Champ2 (Same as BMW CIC) with WINKFP (/showthread.php?tid=75633)
Need help recovering a crashed Mini Cooper Champ2 (Same as BMW CIC) with WINKFP - dtbmw - 24-02-2023
Hi, I am using WINKFP with ICOM and ICOM B (MOST) I have set port to 6802 and using MOST_ASYNC_AB625
I am starting with address 63
Flashing goes to 100 % but fails with the following errors:
1020 Error COAPIKF.CPP coapiKfInit 31
File could not be opened for reading info.eng
================================================================================
8] [2023-02-23] [<WinKFP Tool] 1040 Error COAPIKF.CPP coapiKfRefreshGdaten 10
[ [2023-02-23] [<WinKFP Tool] Error in file processing (general) info.eng
[1641.929] [2023-02-23] [<WinKFP Tool] 3027 Error KFINFO.CPP CKfInfo::Open 2
[1641.929] [2023-02-23] [<WinKFP Tool] INFO file not found konnte ..\data\konv.tmp\info.ger nicht öffnen
[1641.929] [2023-02-23] [<WinKFP Tool] 3027 Error KFINFO.CPP CKfInfo::Open 2
[1641.929] [2023-02-23] [<WinKFP Tool] INFO file not found konnte ..\data\konv.tmp\info.ger nicht öffnen
[1641.929] [2023-02-23] [<WinKFP Tool] 3027 Error KFINFO.CPP CKfInfo::Open 2
[1641.929] [2023-02-23] [<WinKFP Tool] INFO file not found konnte ..\data\konv.tmp\info.ger nicht öffnen
================================================================================
[1649.866] [2023-02-23] [<WinKFP Tool] 4102 Error MODDAT1.C datGetZbNrFromTmpFile 3
[1649.866] [2023-02-23] [<WinKFP Tool] needed Number not found in file ..\work\KFLISTE.DAT
[1649.866] [2023-02-23] [<WinKFP Tool] 3000 Error COAPIKF.CPP coapiKfCheckHwNrTempFileD2 3
[1649.866] [2023-02-23] [<WinKFP Tool] Assembly identification number not found in the files determined by "xxkfconf.da2"
================================================================================
[1649.913] [2023-02-23] [<WinKFP Tool] 1191 Error COAPIKF.CPP coapiKfCheckBsuPossibleD2 6
[1649.913] [2023-02-23] [<WinKFP Tool] The bootsector in the ECU already matches target-HW* and target-ECU-Family
================================================================================
[1650.006] [2023-02-23] [<WinKFP Tool] 4214 Warning COAPIKF.CPP CheckBinDsFilePair 5
[1650.006] [2023-02-23] [<WinKFP Tool] Wrong conversion name ..\data\CH63F1\9290207A.0PA 2LXF320A.pbf
[1650.085] [2023-02-23] [<WinKFP Tool] 3012 Error COAPIKF.CPP coapiKfCheckReferenzD2 12
[1650.085] [2023-02-23] [<WinKFP Tool] Reference project Falsche Projektnummer
[1650.100] [2023-02-23] [<WinKFP Tool] 4214 Warning COAPIKF.CPP CheckBinDsFilePair 5
[16[50.100] [2023-02-23] [<WinKFP Tool] Wrong conversion name ..\data\CH63F1\9290207A.0PA 2LXF320A.pbf
[1650.194] [2023-02-23] [<WinKFP Tool] 4214 Warning COAPIKF.CPP CheckBinDsFilePair 5
[1650.194] [2023-02-23] [<WinKFP Tool] Wrong conversion name ..\data\CH63F1\9290207A.0PA 2LXF320A.pbf
[17:07:51.047] [2023-02-23] [<WinKFP Tool] 2086 PABD/CABD CH63F1 PruefeSignatur 2465
[17:07:51.047] [2023-02-23] [<WinKFP Tool] Signature check failed 11FLASH4, NG_SIGNATUR_PRUEFEN (Programm): ERROR_FLASH_SIGNATURE_CHECK
[17:09:51.067] [2023-02-23] [<WinKFP Tool] 2086 Error COAPI2.CPP coapiRunCabd 6
[17:09:51.067] [2023-02-23] [<WinKFP Tool] Signature check failed SG_PROGRAMMIEREN
[17:09:51.067] [2023-02-23] [<WinKFP Tool] 2086 Error COAPIKF.CPP coapiKfProgSgD2 19
[17:09:51.067] [2023-02-23] [<WinKFP Tool] Signature check failed
Can anybody give me some advice?
Thank you
RE: Need help recovering a crashed Mini Cooper Champ2 (Same as BMW CIC) with WINKFP - Shooting - 24-02-2023
(24-02-2023, 15:10 PM)dtbmw Wrote: Thank you
What Radio are you talking about?
wbr
RE: Need help recovering a crashed Mini Cooper Champ2 (Same as BMW CIC) with WINKFP - dtbmw - 24-02-2023
its a Champ 2 variant on a mini cooper. Similar to a CIC valiant on a BMW
RE: Need help recovering a crashed Mini Cooper Champ2 (Same as BMW CIC) with WINKFP - dtbmw - 27-02-2023
any ideas from anyone?
RE: Need help recovering a crashed Mini Cooper Champ2 (Same as BMW CIC) with WINKFP - wjgud123 - 27-02-2023
(27-02-2023, 15:12 PM)dtbmw Wrote: any ideas from anyone?
Try to reflash with IstaP.
Program should calculate measurement plan and recover headunit
RE: Need help recovering a crashed Mini Cooper Champ2 (Same as BMW CIC) with WINKFP - dtbmw - 27-02-2023
I tried ISTA P and it also fails. coapi 2086 Signature check fail. I am using ICOM NEXT and ICOM B NEXT BMW OEM tools (not clones)
RE: Need help recovering a crashed Mini Cooper Champ2 (Same as BMW CIC) with WINKFP - znakedwrx - 28-02-2023
That unit is gone - I never managed to fix that problem on Champ2 mini. Very weird unit. I think its windows based.
RE: Need help recovering a crashed Mini Cooper Champ2 (Same as BMW CIC) with WINKFP - simaservis1108 - 04-03-2023
I can recover it without any problems.
Its known problem with those units.
RE: Need help recovering a crashed Mini Cooper Champ2 (Same as BMW CIC) with WINKFP - dtbmw - 20-03-2023
(04-03-2023, 08:01 AM)simaservis1108 Wrote: I can recover it without any problems.
Its known problem with those units.
I sent you a message on telegram but haven't heard back. Let me know if you can help. Thanks