+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: BMW BDC replacement with Autohex (/showthread.php?tid=75804)
BMW BDC replacement with Autohex - RaoulK1998 - 28-02-2023
Hello all, i tried to replace new BDC [new from dealer] and code it with Autohex. i wrote FA from old module and recoded it, but it will not initialize properly. i can only connect to 2 modules with ista after coding. car starts and works fine without any issues. it looks like there is some startup/calibration missing but im not sure. at this moment we cannot use ISTA or E-Sys for programming. does anybody know the trick or step im missing? help is very appreciated
RE: BMW BDC replacement with Autohex - laquangksxd - 28-02-2023
Write VCM with e-sys, initialize flexray with tool 32/ista.
RE: BMW BDC replacement with Autohex - RaoulK1998 - 28-02-2023
(28-02-2023, 07:57 AM)laquangksxd Wrote: Write VCM with e-sys, initialize flexray with tool 32/ista.
unfortunately due to our network structure i cannot use esys and ista programming yet, ista diagnosis works, but initializing flexray will not succeed. anyway to do the VCM with autohex? the reason is our remote diagnostics structure only supports CAN as of now, and not ENET
RE: BMW BDC replacement with Autohex - laquangksxd - 28-02-2023
Write me I will help you to do it step by step via teamview.