+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: Solved ✔ skoda superb 2 change cluster (/showthread.php?tid=75842)
skoda superb 2 change cluster - bboctavian - 01-03-2023
Hello, i have a skoda superb2 with 24c64 NEC UDS VDO
The donor cluster can t write or write. i try to put in service mode buy grounding the NEC MCU at pin 67, show me brake light and blinking the belt light. but don t let me to read/write.
i try with xhorse key tool pad.
can someone help me with more info ?
RE: skoda superb 2 change cluster - raffy haddad - 01-03-2023
Service mode should desolder eeprom by external programmer read orig file save , make service file and write to eeprom , solder back to dash put dash in place turn ign on write by obd the orig file back to dash , read immo data and save
RE: skoda superb 2 change cluster - bboctavian - 01-03-2023
Is no external epprom on the pcb
Look on the photo
RE: skoda superb 2 change cluster - jokir - 01-03-2023
The external eeprom is located under the display.
RE: skoda superb 2 change cluster - raffy haddad - 01-03-2023
As our friend jokir mention
Under display and take it easy taking tje display out
RE: skoda superb 2 change cluster - bboctavian - 01-03-2023
Thanks a lot for the info.
I manage to make it happend when i select from key tool plus, VW instand of skoda, and use login 2 method...
I manage to read on bench without remove the eeprom ( thanks for sharing location ) with pongo pin (gnd) on the MCU