ista-p error Global.Vehicle Communication.CoA PI.1000 - (CoAPI) - General fault - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: ista-p error Global.Vehicle Communication.CoA PI.1000 - (CoAPI) - General fault (/showthread.php?tid=76570) |
ista-p error Global.Vehicle Communication.CoA PI.1000 - (CoAPI) - General fault - tintoverano - 17-03-2023 hi, I'm using the latest ista-p v71 only JBE gave the error, the other modules went down fine - pls. see the pict attached after the error I did programming first, it was ok but coding failed again ideas? is it a JBE fault or else? thanks! RE: ista-p error Global.Vehicle Communication.CoA PI.1000 - (CoAPI) - General fault - Yah - 17-03-2023 (17-03-2023, 12:03 PM)tintoverano Wrote: hi, RE: ista-p error Global.Vehicle Communication.CoA PI.1000 - (CoAPI) - General fault - tintoverano - 18-03-2023 (17-03-2023, 18:11 PM)Yah Wrote: It means the coding file .ipo is not found by ISTAP. checked the sgdat folder there are files how could I identify the one required for JBE? thanks RE: ista-p error Global.Vehicle Communication.CoA PI.1000 - (CoAPI) - General fault - unicoil - 18-03-2023 If programming JBE was OK try to code with NCS expert with default values. |