+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: MJD 603.S3 Immo off or pincode from dump please (/showthread.php?tid=78283)
MJD 603.S3 Immo off or pincode from dump please - codereader - 29-04-2023
We have a water damaged ecu from a Corsa
Cannot swap eep from original ecu so would like immo off but if not possible a pin code from the dump would be great please.
Files pulled from replacement ecu using X300dp and attached
RE: MJD 603.S3 Immo off or pincode from dump please - victorysatgr - 29-04-2023
(29-04-2023, 13:47 PM)codereader Wrote: We have a water damaged ecu from a Corsa
Cannot swap eep from original ecu so would like immo off but if not possible a pin code from the dump would be great please.
Files pulled from replacement ecu using X300dp and attached
are you sure this is mjd 6O3?????
because in those ecus we have 95320...... 4kb.......
RE: MJD 603.S3 Immo off or pincode from dump please - codereader - 29-04-2023
(29-04-2023, 14:17 PM) victorysatgr Wrote:(29-04-2023, 13:47 PM)codereader Wrote: We have a water damaged ecu from a Corsa
Cannot swap eep from original ecu so would like immo off but if not possible a pin code from the dump would be great please.
Files pulled from replacement ecu using X300dp and attached
are you sure this is mjd 6O3?????
because in those ecus we have 95320...... 4kb.......
RE: MJD 603.S3 Immo off or pincode from dump please - fabulos78 - 29-04-2023
(29-04-2023, 13:47 PM)codereader Wrote: We have a water damaged ecu from a Corsa
Cannot swap eep from original ecu so would like immo off but if not possible a pin code from the dump would be great please.
Files pulled from replacement ecu using X300dp and attached
all this dumps not realy from mjd603.s3 ecu have 95320 and flash 2mega byte
RE: MJD 603.S3 Immo off or pincode from dump please - codereader - 29-04-2023
Something definately not correct..
I suspect x300 has misread the eep via obd, I will remove from the board and re-read later on.
RE: MJD 603.S3 Immo off or pincode from dump please - al70 - 29-04-2023
ktag clone reads no problem flash and eeprom if you have it
RE: MJD 603.S3 Immo off or pincode from dump please - victorysatgr - 29-04-2023
Or if you have mpps, you can read - write full this ecu without open on bench.....
RE: MJD 603.S3 Immo off or pincode from dump please - codereader - 29-04-2023
Turns out the read by x300 was wrong, ive since dropped the eep in my programmer and read direct no problems.
Pin is 1896
(29-04-2023, 20:22 PM)victorysatgr Wrote: Or if you have mpps, you can read - write full this ecu without open on bench..I do have MPPS , never even gave it a thought.. could of saved some time there !!