W212 ESZ Problem - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9) +--- Thread: W212 ESZ Problem (/showthread.php?tid=78926) |
W212 ESZ Problem - DaBotta - 15-05-2023 Hello guys , hope someone can help me with my problem. Got an W212 with A2129055600 ESZ , that have a problem. Don't recognize the key when is inseret. I had tested with CGDI , all other position are working but KEY INSERED no't show. Now i have another ESZ but i cannot clone it , becuase i cannot compute the password , because CGDI cannot find see the key is inseret in the ESZ. Allready tried to mesure the current on the led diode , and when the key is insered it's change it to 9V aprox , if i remove the key the current is about 1V. Is there any other way to "fix" this problem , just till i read the password so i can clone the ESZ ? Thank you RE: W212 ESZ Problem - MahoJohn - 16-05-2023 (15-05-2023, 22:42 PM)DaBotta Wrote: Hello guys , hope someone can help me with my problem.hi, can you read the ESZ data? and does the car have an ELV? RE: W212 ESZ Problem - DaBotta - 16-05-2023 (16-05-2023, 07:33 AM)MahoJohn Wrote:(15-05-2023, 22:42 PM)DaBotta Wrote: Hello guys , hope someone can help me with my problem.hi, Yes i can read it , but cannot compute the password , becasue the ESZ don't see when the key is inseret. RE: W212 ESZ Problem - MahoJohn - 16-05-2023 (16-05-2023, 08:35 AM)DaBotta Wrote:(16-05-2023, 07:33 AM)MahoJohn Wrote:(15-05-2023, 22:42 PM)DaBotta Wrote: Hello guys , hope someone can help me with my problem.hi, and ELV? the car have elv or not? RE: W212 ESZ Problem - 12manux - 16-05-2023 Remake solder joints on the PCB ,common problem on W212 eis,had like 20 done so far . thank me later RE: W212 ESZ Problem - raffy haddad - 16-05-2023 Try compute as all key lost regards RE: W212 ESZ Problem - DaBotta - 17-05-2023 (16-05-2023, 10:27 AM)raffy haddad Wrote: Try compute as all key lost How to do that , if the ESZ don't recognize if the key is inseret or not. Even AKL need to insert the simulation key , and on that point everything stops @12manux wich one's ? RE: W212 ESZ Problem - 12manux - 17-05-2023 (17-05-2023, 07:03 AM)DaBotta Wrote:(16-05-2023, 10:27 AM)raffy haddad Wrote: Try compute as all key lost Remove the cover of EIS ,there are pins of the plug insterted into PCB but they re not soldered,solder them on the pcm and clean with alcohol |