Enet connection not working on FEM cars - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: Enet connection not working on FEM cars (/showthread.php?tid=78967) |
Enet connection not working on FEM cars - egoy936 - 17-05-2023 Hello, I’m having an issue where I can’t connect fem cars but I can to CAS4/ ZGW module cars with enet. Basically Esys or remote to enet can not find a vin. It’s such a weird issue. Has anyone experienced this issue? RE: Enet connection not working on FEM cars - rocdeng - 17-05-2023 F and G Chassis cars could use ENET. RE: Enet connection not working on FEM cars - Node - 17-05-2023 Ethernet in OBD was introduced with F series (F01). It won't work on E series. That said do you have ethernet link at all on FEM? If so what is your IP config??? RE: Enet connection not working on FEM cars - egoy936 - 17-05-2023 (17-05-2023, 14:08 PM)rocdeng Wrote: F and G Chassis cars could use ENET. Yes I know this is trivial! I am using enet on both fem and CAS 4 cars as they are f series! (17-05-2023, 14:17 PM)Node Wrote: Ethernet in OBD was introduced with F series (F01). It won't work on E series. That said do you have ethernet link at all on FEM? If so what is your IP config??? Yes I know! I am using enet. I tried 2 f10s I can connect and pull a IP and vin I tried 3 f30s with fem and I could not pull an IP/vin number. RE: Enet connection not working on FEM cars - Enabled - 17-05-2023 Make sure you are not on a static IP, and then I would also try windows safe mode with networking. I have seen a few laptops with other software that interferes with ENET communication. RE: Enet connection not working on FEM cars - egoy936 - 17-05-2023 (17-05-2023, 17:52 PM)Enabled Wrote: Make sure you are not on a static IP, and then I would also try windows safe mode with networking. I have seen a few laptops with other software that interferes with ENET communication. I do have bmw explorer which I know shuts down enet when opened. But this program was shut and not running in task manager |