bmw e60 limp mode - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12) +--- Thread: bmw e60 limp mode (/showthread.php?tid=79531) |
bmw e60 limp mode - BENMADI - 01-06-2023 Hello team, i have a problem with my 545i bmw E60 i need to delete the limp mode the car stuck in 4500 RPM ,need to rise rpm for power loos mode to 6800 RPM Attached a partial read with KESS V2 Regards RE: bmw e60 limp mode - sivyx - 01-06-2023 What dtc you have? And for quick request post in thread ecu model and sw number RE: bmw e60 limp mode - BENMADI - 01-06-2023 i have a knock sensor dtc i replaced it now no dtc but engin still goes to limp mode need only to bypass this mode and get a normal rev limiter at 6800 RPM for the software number kess v2 Dont show it for this ECU Dont know mhy its bosh ME9.2.1 I think RE: bmw e60 limp mode - ____ANGEL___ - 01-06-2023 here's some me9.x damos https://cartechnology.co.uk/showthread.php?tid=35310&pid=340609#pid340609 maybe you can solve this yourself, anyway it's strange that the issue was solved but the limiter stays in place till now RE: bmw e60 limp mode - BENMADI - 01-06-2023 (01-06-2023, 06:36 AM)____ANGEL___ Wrote: here's some me9.x damos https://cartechnology.co.uk/showthread.php?tid=35310&pid=340609#pid340609 maybe you can solve this yourself, anyway it's strange that the issue was solved but the limiter stays in place till now Thanks mate but this damos is not compatible with my ecu RE: bmw e60 limp mode - wjgud123 - 01-06-2023 First, flash ecu with WinKfp to restore factory software. After that check if car still is go in limp mode. Maybe somebody remove dtc table? And yes, it should be Bosch ME9.2 RE: bmw e60 limp mode - ____ANGEL___ - 02-06-2023 this is zb7561115, program7544610, data7561116, referenz0087250D610B0C5X3, ME_921, EK9282, E6X MJ04 N62 B44 (01-06-2023, 07:35 AM)BENMADI Wrote:(01-06-2023, 06:36 AM)____ANGEL___ Wrote: here's some me9.x damos https://cartechnology.co.uk/showthread.php?tid=35310&pid=340609#pid340609 maybe you can solve this yourself, anyway it's strange that the issue was solved but the limiter stays in place till now true but same ecu, so something will be in other positions but same things |