+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12)
+--- Thread: Porsche med17.1.6 (/showthread.php?tid=80084)
Pages:
1
2
Porsche med17.1.6 - PIETRO20053 - 15-06-2023
so what did i do wrong here i read the ecu with vvdi pro bosch cable, used da vinci to delete dtc 1479 afterwards i flashed it with kessv2 clone. now engine will not start
RE: Porsche med17.1.6 - ROD-BENDERS - 15-06-2023
What you did wrong was read with vvdi and write with kess v2, I might also mention that davinci does not support porsche.
Br
RE: Porsche med17.1.6 - sivyx - 15-06-2023
If ecu still alive, try to flash with odis.
RE: Porsche med17.1.6 - PIETRO20053 - 15-06-2023
I was the under the impression that it’s a vag ecu with vw symbol on it. I don’t have odis. Is there anyway to revert the process. Ecu still communicates.
RE: Porsche med17.1.6 - ROD-BENDERS - 15-06-2023
(15-06-2023, 09:39 AM)PIETRO20053 Wrote: I was the under the impression that it’s a vag ecu with vw symbol on it.
Assumptions will get you into trouble, if only it was that easy.
Vw may make the hardware but the sw will be different.
Br
RE: Porsche med17.1.6 - PIETRO20053 - 15-06-2023
This is the last time I grab a Vag ecu to do. I only have a few tools and they’re mainly for BMWs genuine. But for Immo and cloning I only have vvdi2 Vvdi prog kess and ktag clone. Any help to get me out of this big would be appreciated
RE: Porsche med17.1.6 - ROD-BENDERS - 15-06-2023
Pcmflash clone and a good scanmatik pro is excellent for these ecu
Cheap now too.
Write your ori with vvdi
Br
RE: Porsche med17.1.6 - sivyx - 15-06-2023
I think the vvdi have only read option to read isn from bmw ecus. Write pflash with ktag, only way with your stuff
RE: Porsche med17.1.6 - vanos batam - 15-06-2023
(15-06-2023, 10:33 AM)sivyx Wrote: I think the vvdi have only read option to read isn from bmw ecus. Write pflash with ktag, only way with your stuff
he talk about porsche,, no the bmw
RE: Porsche med17.1.6 - PIETRO20053 - 15-06-2023
(15-06-2023, 10:20 AM)ROD-BENDERS Wrote: Pcmflash clone and a good scanmatik pro is excellent for these ecu
Cheap now too.
Write your ori with vvdi
Br
vvdi prog will not allow me to write only read
also im going to post vvdi2 eeprom calculation txt and vr request from kess will someone tell what i did wrong because even after flashing the ori file with kess again same
so CAR started worked for like 3 cycles got p309d code cleared it and when i went to start again no start same fault hybrid system and press brake im pressing the brake and nothing....... ugh this car is driving me nuts