E65 730d issue auto P - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: E65 730d issue auto P (/showthread.php?tid=80475) |
E65 730d issue auto P - vld - 24-06-2023 Hello everyone, i have issue with DDE on E65 730d. The car have a disabled dtc and dpf egr off. I flashed dde with winkfp to avoid hidden trouble codes, everything went well, there was a faulty Air mass flow, and a manifold air temperature sensor. After replacing them, everything was fine. However, this DDE doesn't show up in NSC Expert and I can't code it after the reflash, this leads to a problem with the Auto P function (cannot start him in I-drive menu). Is there any method to code the default ECU, maybe with tool 32 ? The other thing I can think of is to flash ECU with ISTA P ? Any advice would be helpful. RE: E65 730d issue auto P - ____ANGEL___ - 24-06-2023 no coding for this ecu, only flashing RE: E65 730d issue auto P - Hoborg - 28-06-2023 Exactly, but if You flashed modified DDE with WinKFP then You for sure have stock firmware with EGR functions. |