Solved ✔ Mercedes W205 CRD3PLUS.A0 update went wrong - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9) +--- Thread: Solved ✔ Mercedes W205 CRD3PLUS.A0 update went wrong (/showthread.php?tid=80835) |
Mercedes W205 CRD3PLUS.A0 update went wrong - Kayhan 17# - 05-07-2023 Hey guys, I did something very stupid, I tried to update CRD3PLUS.A0 ECU with my PRODIAG because it updated all ecus until yet without problems. As always dont trust updating any ECU or TCUs, it started flash procedure but then the ECU died. What I did was to get a Bench read which I posted here in the attachment where I hope someone can repair myfile or provide matching file if there is no virtual eeprom at least. I also tried to find a donor flash and put it on the ECU but car does not start (at least shows no DTCS but whole car is full of comms errors), what the car even does now is that it even doesnt turn off the ignition where I had to remove battery. What options do I have, virginise ECU and relearn online? Can I do it without Xentry maybe with my PRODIAG or FVDI? Is it possible to repair ECU by getting a donor flash? ECU Label: FV 12.28 HW 12.04 PD 14M09 A6519004500 A6519004000 CRD3PLUS.A0 OM651 - SOL Best Regards kaya RE: Mercedes W205 CRD3PLUS.A0 update went wrong - ____ANGEL___ - 05-07-2023 search for this ori CRD3-651-WMCB9D11-205WA-150kW_NAG2-3OSL2S-EU6SCR_LH-EF-DS09_ME192501 and check what happened in flash. RE: Mercedes W205 CRD3PLUS.A0 update went wrong - Kayhan 17# - 05-07-2023 I could not find that file in the net RE: Mercedes W205 CRD3PLUS.A0 update went wrong - ____ANGEL___ - 05-07-2023 (05-07-2023, 13:04 PM)Kayhan 17# Wrote: I could not find that file in the net you rolled over all the net in an half hour??? what??? anyway... ziptuning has it, and also ecuresources. Before buying make sure that is a full dump. RE: Mercedes W205 CRD3PLUS.A0 update went wrong - blerim shehi - 05-07-2023 (05-07-2023, 11:19 AM)Kayhan 17# Wrote: Hey guys, try to tested with vediamo.. connected? RE: Mercedes W205 CRD3PLUS.A0 update went wrong - Kayhan 17# - 05-07-2023 I flashed files via Monaco and I got DTC P0513 Start Authorization not enabled. After playing around in EZS, that error from ECU is gone, before anyone asks why I play around, because I see that EZS coding is gone and thats why everything is lit in dashboard + errors. How can I get correct coding on EZS, only Online? RE: Mercedes W205 CRD3PLUS.A0 update went wrong - Kayhan 17# - 07-07-2023 I only tried to program CDI but i dont know what launch did in the background, for me, it looks like EZS coding is invalid as right after CDI flash attempt all the error messages appeared in the dashboard, car does not turn ignition off when key is removed and doors are closed. I add DTC readouts before I play around in EZS and after. RE: Mercedes W205 CRD3PLUS.A0 update went wrong - Kayhan 17# - 10-07-2023 Coded EZS codings from another car(backuped and restored on this one), almost all errors are gone now beside of rooftop error which this car does not have it. I only need to fix the drive authorization now. RE: Mercedes W205 CRD3PLUS.A0 update went wrong - Kayhan 17# - 11-07-2023 Hey all, Car starts again! Here is what I did for other people First I killed ECU with Launch flash update procedure Did Bench read, its the posted file in this Thread After Full Read i flashed donor flash from forums and car did not start Reflashed with Monaco and still no start Did another Bench and could see that 2 bytes have changed in the eeprom with donor flash Played around with EZS and got rid of a few errors in the dashboard Got another c class car and dumped its ezs coding Today i did another approach on midday and put coding of other c class on this car, a lot of errors disappeared but still no start and no start authorization. I started second approach at late night and got car running. Connected on bench, flashed eeprom, no start Flashed with Monaco, no start Did full read I then decided to flash first fulldump posted also in this thread, of course no start Reflashed with monaco and car started on first turn Put back ori ezs coding Car starts fine. |