+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: S15A - EPS2 Missing BTLD File in SDP 4.42.20 (/showthread.php?tid=81104)
S15A - EPS2 Missing BTLD File in SDP 4.42.20 - Chillmeister - 12-07-2023
Hi,
does anybody have BTLD 00007653_023_048_001 from EPS2 in G30/31? It is missing in actual PSDZD Data Full.
Thanks
RE: S15A - EPS2 Missing BTLD File in SDP 4.42.20 - Node - 12-07-2023
It is NOT needed for flashing (because it is remapped). WHY do you need it?
RE: S15A - EPS2 Missing BTLD File in SDP 4.42.20 - Chillmeister - 12-07-2023
(12-07-2023, 17:57 PM)Node Wrote: It is NOT needed for flashing (because it is remapped). WHY do you need it?
Ok thanks, then i will only flash swfk and swfl. I only want to Update to 23-07-527.
RE: S15A - EPS2 Missing BTLD File in SDP 4.42.20 - Node - 12-07-2023
You do NOT understand. You MUST update bootloader in order to flash new firmware. You JUST don't NEED that BTLD FILE!!! blup_00007656.***.023_048_001 files will be used INSTEAD!!!
RE: S15A - EPS2 Missing BTLD File in SDP 4.42.20 - Chillmeister - 12-07-2023
Will Esys automatically pic the right blup File? Because for now it shows missing btld File when checking software availability? Or Should i use ista for flashing in this Case?
RE: S15A - EPS2 Missing BTLD File in SDP 4.42.20 - Node - 12-07-2023
IMHO it will pick correct file. ISTA will do the same. The verification button is DUMB and does not look into remappings.
RE: S15A - EPS2 Missing BTLD File in SDP 4.42.20 - Chillmeister - 13-07-2023
(12-07-2023, 20:14 PM)Node Wrote: IMHO it will pick correct file. ISTA will do the same. The verification button is DUMB and does not look into remappings.
Successfully Programmed EPS2 with ISTA 4.42.20. Esys wasnt able to do that. When click "start" Button always got Message Missing SWE Files (BTLD) even with newest Esys 23.04.
Thanks anyway for your help