+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: help regarding a SZL Plug E64 retrofiting F12 Steering Wheel (/showthread.php?tid=81585)
help regarding a SZL Plug E64 retrofiting F12 Steering Wheel - Fraizer - 26-07-2023
Hi,
i need your help to figure out what are the 6 Pins on the SZL 6 pins plug where go the steering wheel.
i have an F12 M6 steering wheel to retrofit on a E64 LCI 635D of 07/2009 (with ACC and lane departure vibro and heater options) i have the Adapter Emulatorfrom car system who allow that to work. The steering F12 mechanicaly is ready to fit perfectly the car.
my problem is on wiring that Adapter emulator and the SZL + wirign corectly Steering whel plugs. Actualy i just want to know the wirign of the steering that 6 pins from the steeing.
i try to figure out on newTis about the diagram but i dont understand what i get. i have big problems with digrams to read them and understand them. i need please your help for that.
i get this for the 6 pins on the SZL: plug name : '''X1'''
1. FA1+
2. FA1-
3. FA2+
4. FA2-
5. FANF
6. GND
when i expect to get: this is the wire plug on the F12 Steering whell
- Horn
- Paddle GND
- GND
- Lin Bus
- +12V
- Paddle
what mean please FA1 FA2 FANF (ok for the GND the only one i know ^^)
i add the picture diagram
thank you guys to help me to figure out
RE: help regarding a SZL Plug E64 retrofiting F12 Steering Wheel - Rudkinp - 26-07-2023
FANF is for HORN
FA1 - stage 1 of airbag
FA2 - stage 2 of airbag
U+/STEPTR/GND is for paddles - if remeber good it was like
STEPTR + U+ -> GEAR UP
STEPTR + GND -> GEAR DOWN
But you can check it simply on your own
EDIT
AS TomoR said bellow - You need to look another wiring diagram but anyway I will left those upper infos.
RE: help regarding a SZL Plug E64 retrofiting F12 Steering Wheel - TomoR - 26-07-2023
First....you watching wrong diagram..... this is for old e6x without start stop button.... you car dont have steering wheel electronic like on old e6x.
RE: help regarding a SZL Plug E64 retrofiting F12 Steering Wheel - Fraizer - 26-07-2023
thank you so much guys, but i found only that diagram... can you please help me to get the right diagram ? is the only one i found on newtis or i look very bad
RE: help regarding a SZL Plug E64 retrofiting F12 Steering Wheel - Rudkinp - 26-07-2023
There is link to newtis specific wiring diagram in attachement
RE: help regarding a SZL Plug E64 retrofiting F12 Steering Wheel - Fraizer - 26-07-2023
thank you alot Rudkinp im very bad in electronics and diagram lol.... the one i give in my topic was from the guy who make me an harness then i fault it was this.
to not make mistake can i ask you please
what is pin 1 to the 6 ? like the list i had from him wit the old diagram ? like:
pin = 1. FA1+
2. FA1-
3. FA2+
4. FA2-
5. FANF
6. GND
who mean pin1- Horn
- Paddle GND
- GND
- Lin Bus
- +12V
- Paddle
without your help guys i will stay for ever on this... thank you both of you and this great forum ^^