+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Car Technology Motorbikes Forums (https://cartechnology.co.uk/forumdisplay.php?fid=23)
+--- Forum: Motorbikes Problems & General Discussions (https://cartechnology.co.uk/forumdisplay.php?fid=37)
+--- Thread: VIN + ECU (/showthread.php?tid=81586)
VIN + ECU - leonardohenriquebr - 26-07-2023
Hello everyone, Just bought a R1250 2021 from an auction, and for my surprise it came without ECU module. finally got a used one and EWS, in short, everything is working, Did all work via ISTA, my problem is, I got a VIN from another Bike.
Does it possible to change it? and How?
Thanks.
RE: VIN + ECU - Vojno - 26-07-2023
It's not that simple!
1. This requires special tools, which are not cheap!
2. Of course, it also requires skill and knowledge,
3. You should know the system comprehensively!
4. If you rewrite the VIN in the ECU, EWS (BMS-O) then you will also need FSCs!
5. It should be rewritten the VIN everywhere (BMS, EWS, keys) for later sale...
This is a new vehicle, shouldn't it have been bought from a dealer? I mean orig BMS-O for orig VIN.
Only the ECU was missing?
Did you have EWS and the keys? I think the bike is Keyles!