CarTechnoloGY
Jeep grand Cherokee 2.7 CRD 0281 010 293 immo off - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: Jeep grand Cherokee 2.7 CRD 0281 010 293 immo off (/showthread.php?tid=81734)



Jeep grand Cherokee 2.7 CRD 0281 010 293 immo off - luxervol - 26-03-2021

Jeep grand Cherokee 2.7 CRD 0281010293  immo off
is it possible to turn off immo in the flash


RE: Jeep grand Cherokee 2.7 CRD 0281 010 293 immo off - 12manux - 31-03-2021

good luck with that ,i ve had 2 cars so far i was not able to disable immo .

on 1 car i did syncro between skim module and ecu and on the 2nd car i made key from hc05 skim module ..........................


goodluck


RE: Jeep grand Cherokee 2.7 CRD 0281 010 293 immo off - luxervol - 06-04-2021

Thanks for the info


RE: Jeep grand Cherokee 2.7 CRD 0281 010 293 immo off - mmartinezg - 08-04-2021

The HPTUNER tool does it by OBDII


RE: Jeep grand Cherokee 2.7 CRD 0281 010 293 immo off - josef1708 - 08-04-2021

i am not sure but it looks like an EDC15C3.

If its possible only with the eeprom data.
But i think there was never found any solution.


RE: Jeep grand Cherokee 2.7 CRD 0281 010 293 immo off - luxervol - 08-04-2021

the eeprom solution doesn't work and nobody has a flash solution


RE: Jeep grand Cherokee 2.7 CRD 0281 010 293 immo off - 12manux - 08-04-2021

only software that would work is DREWTECH Toolbox 2,there is an option called "SKIM RESET" you idsconect skim module and the ecu is being either virginised or immo deleted and starts just fine.I ve seen this procedure done not only on 2.7 but on mostly all engines including chrysler .


the software cand be downloaded for free but you need special hw interface from them.There are some topics on the other forum showing how you can modify some registers in order to work with any J2534 interface (i ve tried but it not worked for me)


.