F25 6WA Retrofit - ZGW problem - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: F25 6WA Retrofit - ZGW problem (/showthread.php?tid=82005) Pages:
1
2
|
F25 6WA Retrofit - ZGW problem - Krysiaman - 08-08-2023 Hi! I have problem with an F25 - 2013 year. Car had basis cluster, CHAMP2 without MOST and ZGW without most. I have retrofited 6WA cluster, ZGW 02 with most and CHAMP2 with most. Connected MOST cable to each other. I can see modules in ISTA, they are somehow working but I can't detect them in E-SYS. Is it a problem with ZGW or I have to somehow initialize these modules in ZGW? RE: F25 6WA Retrofit - ZGW problem - user_530d - 08-08-2023 Do you use „ECU read“ in ESYS? RE: F25 6WA Retrofit - ZGW problem - Krysiaman - 08-08-2023 Yes but it can't detect these modules. To handle coding I have modified SVT_IST file and loaded it in E-SYS. But I wonder why it doesnt show up when I use ECU Read? RE: F25 6WA Retrofit - ZGW problem - user_530d - 08-08-2023 Sure? You write it in SVT then it is in car. …next time i will write tv-Modul in SVT, then i have TV in car. „ECU Read“ read out all installed modules from car. RE: F25 6WA Retrofit - ZGW problem - vmetalica - 08-08-2023 need update svt in zgm than you will see modules in esys RE: F25 6WA Retrofit - ZGW problem - user_530d - 08-08-2023 That’s right, normally read out SVT_IST over „ECU Read“ and then write back to VCM. When „ECU Read“ not give all ECU‘s what will you write in the SVT, which HWEL, BTLD, SWFL …? RE: F25 6WA Retrofit - ZGW problem - Krysiaman - 09-08-2023 Read ECU doesn't detect these modules. Tried many times. I have generated SVT_SOLL with new SA options to gain info about HWEL, BTLD, SWFL etc and I have copied it to SVT_IST and it worked. Tried to update VCM manually and by coding any module. Nothing works. ISTA see them without any problem. Maybe the problem is with ZGW. I had ZGW-02 4SK (9299594) and replaced it with ZGW-02 Mid Plus with MOST plug (9232163). Had to flash it to ZGW2 using modified SVT. I still wonder why does it want different HWEL from ZGW? RE: F25 6WA Retrofit - ZGW problem - user_530d - 09-08-2023 If you flash ZGW-02 MID Plus to ZGW2 you lost MOST on this. After Flash you has ZGW2-4SK. RE: F25 6WA Retrofit - ZGW problem - Krysiaman - 09-08-2023 So why every function in car works? I have nav guidance info on cluster. Which ZGW should I use? RE: F25 6WA Retrofit - ZGW problem - user_530d - 09-08-2023 I'am not a F25 expert but your combination is not correct. Can "Extended Instrument cluster" work with HU 606 or you need 609? 606 give ZGW2-4Sk > CHAMP2 > BKOMBI This combination dont use MOST 609 give ZGW2-4SK > HU_NBT > KOMBI This combination use MOST from KOMBI to HU_NBT, NBT is MOST-Master and don't need ZGW with MOST. EDIT: Ok, when i add 610 (HUD) your combination is possible and don't need ZGW with MOST only 4SK. I think in this combination CHAMP2 is MOST-Master. |