+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: Toyota G chip (/showthread.php?tid=8201)
Toyota G chip - bara001 - 16-06-2015
Hi all
I am looking for a software that can write Toyota G chip to Dump or Code G chip via dump.
Thanks
RE: Toyota G chip - antonypaul - 16-06-2015
Hello Friend china software done this with small hardware unit
RE: Toyota G chip - volavka - 16-06-2015
Dont need to buy any Tool/Software to made Toyota G chip m8
just read eeprom 93cxx and replace line h0110 >> h0119 with h00E0 >> h00E9, then insert G chip key PG1-36-56 and turn on off five times,
so key self learning
Good Luck
RE: Toyota G chip - bara001 - 17-06-2015
(16-06-2015, 23:56 PM)volavka Wrote: Dont need to buy any Tool/Software to made Toyota G chip m8
just read eeprom 93cxx and replace line h0110 >> h0119 with h00E0 >> h00E9, then insert G chip key PG1-36-56 and turn on off five times,
so key self learning
Good Luck
Thanks for reply.
Can I do the same on 93LC66 for Toyota avanza ?
Thanks
RE: Toyota G chip - bara001 - 17-06-2015
here is the file i need to code a G key
Key Info: on the picture
thanks in advance
RE: Toyota G chip - bram380 - 24-06-2015
(17-06-2015, 07:28 AM)bara001 Wrote: here is the file i need to code a G key
Key Info: on the picture
thanks in advance
This dump not for g-chip.
Use Key 4D
RE: Toyota G chip - bara001 - 24-06-2015
(24-06-2015, 18:07 PM)bram380 Wrote: This dump not for g-chip.
Use Key 4D
Hi. Sorry I uploaded a wrong file
. This file is from 93LC66 it use 4D. Do you have a G chip programmer via dump?
Thanks
RE: Toyota G chip - savoy81 - 24-06-2015
You can do it by tango or chines g key programmer both of them need to read dump from immobilizer
but are there any one programmed Toyota h key
RE: Toyota G chip - jassoyer - 24-06-2022
Hello, old thread I know, but has anyone had any luck with an toyota Avanza 2012, it uses the immo box is Daihatsu 89780-B0050. Seem unable to program it with obdstar x300 pro3, tango fly oem or keytool max. Have read it needs an virgin file for the immobilizer to work and then to add keys to the dump with a toyota G dst80 transponder.
Regards,
Jass