Solved ✔ Kombi programming failed E70 - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: Solved ✔ Kombi programming failed E70 (/showthread.php?tid=82085) |
Kombi programming failed E70 - AdiP - 10-08-2023 Guyz, I need some help. I\ve replaced FRM module, but when programming in ISTA P, voltage dropped (a damn bad charger) and KOMBI went failed. I cannot connect with winkfp, error 200. Now, I can't revive kombi, car starts but no kombi. Is my cousin;s car. ICOM Next, sp daten for e70 installed... Now, can someone help me out with this remote? Anydesk or teamviewer. I am willing to pay effort. Thanks! RE: Kombi programming failed E70 - vld - 10-08-2023 (10-08-2023, 14:30 PM)AdiP Wrote: Guyz, I need some help. I\ve replaced FRM module, but when programming in ISTA P, voltage dropped (a damn bad charger) and KOMBI went failed. I don't think it's possible unless you see it. It will need to be reprogrammed with a programmer. This will not happen remotely. RE: Kombi programming failed E70 - jaramillo - 10-08-2023 (10-08-2023, 15:07 PM)vld Wrote:(10-08-2023, 14:30 PM)AdiP Wrote: Guyz, I need some help. I\ve replaced FRM module, but when programming in ISTA P, voltage dropped (a damn bad charger) and KOMBI went failed. Agree.. You can maybe try with winkfp/NFS, but get ready for a 35080 chip programmer RE: Kombi programming failed E70 - pRoxxxDD - 10-08-2023 Do turn indicators blink in kombi? Does it answer in tool32 to ident job, with KOMB70.prg? RE: Kombi programming failed E70 - 2013m5 - 11-08-2023 (10-08-2023, 14:30 PM)AdiP Wrote: Guyz, I need some help. I\ve replaced FRM module, but when programming in ISTA P, voltage dropped (a damn bad charger) and KOMBI went failed. Did you try battery reset and retry ISTA/P? RE: Kombi programming failed E70 - budddyyy - 11-08-2023 if the kombi not answered in car then only programmer job. cheapest solution i think is r270. roundabout 20€ then you can write new dump on chip and programm it after that in car RE: Kombi programming failed E70 - AdiP - 11-08-2023 Drove 200km to a guy, I've left the car there, now I'm waiting, he told me that it can be a 5 min job or 2 hours (bench case). Kombi had turn lights blinking. I'll let you know about status. Ty for infos! RE: Kombi programming failed E70 - Tombo - 11-08-2023 if is no communication r270 will not help. Its eprom prog. In this case flash is damaged and it will end up with cluster replacement more likely RE: Kombi programming failed E70 - pRoxxxDD - 11-08-2023 (11-08-2023, 07:31 AM)AdiP Wrote: Kombi had turn lights blinking. Thats mean that it's in the programming state, WinKfp should help. RE: Kombi programming failed E70 - AdiP - 14-08-2023 Eeprom rewrite was the solution. All good now! |