+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: G20 entrynav2+6u3 cluster - transfer car model and color (/showthread.php?tid=82091)
G20 entrynav2+6u3 cluster - transfer car model and color - osd - 10-08-2023
Does anybody know which job in tool32 make model and color transfer to 6u3 instrument cluster ?
I have issue with 6u3 cluster installed in g2x with entrynav2.
All works except g05 image on cluster, but ISTA don't have proper ABL in this case.
Or somebody know how to change it different way ??
RE: G20 entrynav2+6u3 cluster - transfer car model and color - krug - 10-08-2023
you need HU_MGU, display, RAM, wirings, certs, patching, FSCs.
RE: G20 entrynav2+6u3 cluster - transfer car model and color - osd - 10-08-2023
(10-08-2023, 21:36 PM)krug Wrote: you need HU_MGU, display, RAM, wirings, certs, patching, FSCs.
I don't want to install MGU, I just asking is anybody know tool32 job or any other manual way to set model and color.
RE: G20 entrynav2+6u3 cluster - transfer car model and color - bogdantogo - 11-08-2023
DKOMBI4 cluster needs Ethernet communication with MGU in order to show the correct car model and color. It is not just coding or tool32 job.
Even if you have HU_MGU and DKOMBI4 installed and the IPSEC communication is not established because of invalid IPSEC certificates some DKOMBI functions won't work and the wrong car model/color will be displayed. Default is some G05 X5 as you see in your case.
P.S: If you explore the DKOMBI4 EMMC content you will find the VehicleFallback_resources.ramres VehicleFallback.ramscene files and maybe if you replace those something can be done but that's completely another discussion.
RE: G20 entrynav2+6u3 cluster - transfer car model and color - Mwahab - 12-08-2023
(11-08-2023, 07:00 AM)bogdantogo Wrote: DKOMBI4 cluster needs Ethernet communication with MGU in order to show the correct car model and color. It is not just coding or tool32 job.
Even if you have HU_MGU and DKOMBI4 installed and the IPSEC communication is not established because of invalid IPSEC certificates some DKOMBI functions won't work and the wrong car model/color will be displayed. Default is some G05 X5 as you see in your case.
P.S: If you explore the DKOMBI4 EMMC content you will find the VehicleFallback_resources.ramres VehicleFallback.ramscene files and maybe if you replace those something can be done but that's completely another discussion.
Can u share the pinouts?