Bricked cas4+ 1n35h - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: Bricked cas4+ 1n35h (/showthread.php?tid=82285) |
Bricked cas4+ 1n35h - Misterwasp - 17-08-2023 Bmw cas4+ bricked Hi, could someone please help me repair my dumps as my tool crashed when trying to update. 1n35h mask 2014 bmw f10. Ive removed the dme and have isn and secret key but car is dead and rear lights are always on. Cas is 3590139 model RE: Bricked cas4+ 1n35h - RuleNormaliai - 17-08-2023 Just get PFLASH from tue same mask and write it to CAS on bench. you can PM me i’ll have a look if i have one available bit later. RE: Bricked cas4+ 1n35h - budddyyy - 17-08-2023 only for knowledge. which tool was it and you worked with or without power supply ? RE: Bricked cas4+ 1n35h - Misterwasp - 17-08-2023 (17-08-2023, 11:05 AM)budddyyy Wrote: only for knowledge. which tool was it and you worked with or without power supply ? Vvdi keytool plus and with stabiliser . Went to 95 percent then ha ged for 30 seconds. RE: Bricked cas4+ 1n35h - pawelkos - 17-08-2023 Try this p-flash. RE: Bricked cas4+ 1n35h - budddyyy - 18-08-2023 (17-08-2023, 12:14 PM)Misterwasp Wrote:(17-08-2023, 11:05 AM)budddyyy Wrote: only for knowledge. which tool was it and you worked with or without power supply ? thanks for info . with vvdi bimtool pro i have not tried cas4+ cas 3 istap and cas 4 everytime without problem RE: Bricked cas4+ 1n35h - Diagmaister - 18-08-2023 Can you not recover on bench? RE: Bricked cas4+ 1n35h - atiwok - 18-08-2023 leave it for couple of hours and try to flash it via esys cas does not have firmware only in 1n35h you will get hardware error code if firmware won't match |