CarTechnoloGY
Clip 230 - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: Renault - Dacia - Nissan - Infiniti (https://cartechnology.co.uk/forumdisplay.php?fid=57)
+---- Thread: Clip 230 (/showthread.php?tid=82452)

Pages: 1 2


Clip 230 - flavio69 - 22-08-2023

You know what you have to do with those 2 buttons.


RE: Clip 230 - ruben_17non - 26-08-2023

hello
can you help to install this?

i have plataform error.


RE: Clip 230 - mattydr67 - 26-08-2023

Before to install CAN CLIP you have to apply the specific registry patch for 32 or 64 bits system/platforme.
Did you done this first?
Good luck


RE: Clip 230 - ruben_17non - 26-08-2023

(26-08-2023, 13:37 PM)mattydr67 Wrote:  Before to install CAN CLIP you have to apply the specific registry patch for 32 or 64 bits system/platforme.
Did you done this first?
Good luck

Im not have patch.
my system is win 11 x64

Its possible use Clone internace in x64 system?
thanks


RE: Clip 230 - mattydr67 - 26-08-2023

Well first of all CAN CLIP is working under W7,8,8.1 and 10 32bit OS is working full.
Under W7,8,8.1 and 10 64bit OS is not working full. Old Renault platforme ASDE isn't wirking at all.
Also Renault CAN CLIP sonde ( RLT2002 ) will doesn't works at because there isn't 64bit drivers for it.
The interface is working us Renault Alliance VI and chinese clone 1B-Allinace and Bosch RNM.
Also some J2534 interfaces should works but not full.
I belive you can see the conclusion:
If you have RLT2002 interface you need to install W10 32bit OS. You need a 32 bit platforme patch and in the last you need RLT2002 patch too.
As I know but I am not sure because I don't use RLT2002 for very long time there isn't a patch that will let you use this RLT2002 with any CAN CLIP version after 2014.
But if you find one that will works you will be a lucky man.
Good luck


RE: Clip 230 - autogaskomotini - 29-08-2023

hi. i have original ( not clone ) rtl 2002 probe. will clip 230 work with my sonde if i install it on win 7 32 bit ? any ideas?


RE: Clip 230 - mattydr67 - 30-08-2023

(29-08-2023, 22:13 PM)autogaskomotini Wrote:  hi. i have original ( not clone ) rtl 2002 probe. will clip 230 work with my sonde if i install it on win 7 32 bit ? any ideas?
If you read carfully my post above your then you already got the answare but here you have it again:
"If you have a good patch for RLT2002 vci then it will can be used"
Good luck


RE: Clip 230 - flavio69 - 30-08-2023

As far as I know,clip 214 was the last one working with RLT2000


RE: Clip 230 - lolasu - 30-08-2023

the link is not working.


RE: Clip 230 - mkii - 30-08-2023

(30-08-2023, 16:38 PM)lolasu Wrote:  the link is not working.

Same!