+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: Speed Limit issues after updating to 4.43.10 (/showthread.php?tid=82977)
Speed Limit issues after updating to 4.43.10 - hallamnet - 05-09-2023
Hi All.
I have a G20 from 2019 and recently updated it to PSDZ Data 4.43.10 and ever since this, if I go over the speed limit, I get a strobe effect of the speed limit on the KOMBI and HUD. This used to be a slow pulsating speed limit in orangy/red.
I have taken off all of the custom coding and VO coded the car and this is still present.
Can anyone help me to try and get this back to the way it was?
I know I can de-select the show speeding that stops this but I kind of liked the feature before.
My bad for posting link in the body of the message. Now attached.
Thanks,
Hal
RE: Speed Limit issues after updating to 4.43.10 - rocdeng - 06-09-2023
4.43.21 is out, did you try to flash to that version?
RE: Speed Limit issues after updating to 4.43.10 - hallamnet - 06-09-2023
Not as of yet no.
I will download now and will give it a flash tomorrow and will update.
RE: Speed Limit issues after updating to 4.43.10 - hallamnet - 06-09-2023
Just flashed the car and found that the KOMBI was the only unit needing an update.
Lets see if this has resolved the issues after a quick test drive.
I can confirm this is now resolved with the update.
The speed limit sign on the KOMBI now fades in and out as it used to.
I am guessing there was a bug in the last version of the Kombi hence a release with just the one unit to be coded?
I have put back the custom coding and will give the car another drive later on.
Hope this thread will help someone,
Hal