Solved ✔ VW Golf G85 steering angle sensor No voltage - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: VAG Group (VW - Audi - Seat - Skoda - Bentley) (https://cartechnology.co.uk/forumdisplay.php?fid=55) +---- Thread: Solved ✔ VW Golf G85 steering angle sensor No voltage (/showthread.php?tid=83035) |
VW Golf G85 steering angle sensor No voltage - ELMEPRO - 07-09-2023 Holla, i have impasible problem. Its golf 5 2008 Im not receiving voltage from (Steering column electronics control unit -J527-) to (G85 stering angle sensor). To Steering column electronics control unit -J527- power train can bus low OK power train can bus high OK from wire convenience can bus low NOT ok 0.8v from wire convivence can bus high NOT ok 4.2v terminal 30 to j527 OK terminal 31 to j527 OK terminal 50 to j527 OK terminal 15 to j527 OK from j527 to g85 5V NOT ok 0v 12V Not ok 0v I changed j527 with used one same problem i changed two g85 same problem i removed convenience can bus from j527 same problem can someone point me out what should i do ? do i try order another j527? Pic in attachment RE: VW Golf G85 steering angle sensor No voltage - ELMEPRO - 25-09-2023 (07-09-2023, 16:14 PM)ELMEPRO Wrote: Holla, i have impasible problem. Fixed, sad thing is that steering angle will shows as 0 degree, you need do basics settings after that you can see degree only.(wierd) I my case to make a basic settings i was required to do wheel alignment and change rear abs rings(bearings) SOLVED |