+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: Flashing used Frm2 missing ipo file (/showthread.php?tid=83118)
Flashing used Frm2 missing ipo file - Haug530d - 09-09-2023
Trying to flash a used Frm2 into my car with winfkp, but it says it's missing ipo files, I have daten v71 files and using the e89 folder as Sp-daten for my e87, the FRM2 is also from an e87 but an English one, so the power windows is reversed.
The ipo which is missing is 08010000FRM2.ipo
I have looked in the sgdat folder of e89 but it's not there.
RE: Flashing used Frm2 missing ipo file - johann74270 - 09-09-2023
hello you need code the fFRM only
RE: Flashing used Frm2 missing ipo file - Haug530d - 09-09-2023
(09-09-2023, 19:01 PM)johann74270 Wrote: hello you need code the fFRM only
I don't need to change the vin in the module?
RE: Flashing used Frm2 missing ipo file - ____ANGEL___ - 09-09-2023
change it if you want, is not mandatory, and flashing is not required for vin change.
RE: Flashing used Frm2 missing ipo file - Haug530d - 09-09-2023
Ok, so how do i go about and change the module to match my car then?
RE: Flashing used Frm2 missing ipo file - jaramillo - 09-09-2023
Just use ncs expert/tool32, write FA and vo code module. Write Istep, 2 mins job
RE: Flashing used Frm2 missing ipo file - Haug530d - 09-09-2023
Coded the module and it is now working like a left handed module.
The driver side window is not working though, anyone have any idea what it could be, before i tear off the door? could it be the door motor or anything else?
RE: Flashing used Frm2 missing ipo file - jaramillo - 10-09-2023
Did you used your original vo? First start with that
RE: Flashing used Frm2 missing ipo file - Haug530d - 10-09-2023
In NCS Experttool this is what i did.
Chassis, choose E89
Choose ECU i choose CAS go back and i choose Process ECU "NFRM" Change Job FA_Write, Excecute job, change job SG_Codieren, Execute job.
Does this seem right?
I also tried to change the VIN beofre i coded with Tool32 Vin still says YYYYY for the FRM module in Inpa, also a few others says the same.
RE: Flashing used Frm2 missing ipo file - Node - 10-09-2023
You sure your CAS has PROPER FA???