+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12)
+--- Thread: Opel Insignia 2018 AdBlue problem (/showthread.php?tid=83190)
Opel Insignia 2018 AdBlue problem - hajdin91 - 12-09-2023
Hi,
I have problem with disconnect AdBlue unit (Opel Insignia 2.0CDTI - AWD - 2018 - 154KW - Automatic).
If I disconnect connector on SCR pump then I have problems with the fuel gauge that stops working after fuel is empty and I fill fuel then gauge tell me that no fuel in tank...
With connector connected there is no problem but I dont know if it is ok to let the connector on SCR pump connected and all will work ok.
Car has also DPF + EGR removed.
Attached picture of connector.
I hope someone had same problem and there is a solution for my problem.
Thanks
RE: Opel Insignia 2018 AdBlue problem - Jurebv - 12-09-2023
module and pump can remain connected with proper solution
RE: Opel Insignia 2018 AdBlue problem - aladinnu - 18-09-2023
for that solution u need to reconnect can wire. best is to use proper solution as @jurebv said.