+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: Needing Help finding ZUSB (/showthread.php?tid=83336)
Pages:
1
2
Needing Help finding ZUSB - that4chanhacker - 16-09-2023
Hey any help would be much appreciated. I have a customer with a 08/2008 build E83 LCI (franekn car) they swapped the mechatronics from a E90 and threw away their original.... issue is ISTA just updates based on UIF which the UIF is wrong for both! the car is a Kline car with a DCAN trans. Im hoping if I do a expertmode flash I can get the kombi and DSC to communicate with it. if someone could share the correct ZUSB that would be great! I tried mapping it with findecu however their is the kkm_SG.txt file in the daten....
VIN is WJ27786
RE: Needing Help finding ZUSB - lustek - 16-09-2023
(16-09-2023, 02:11 AM)that4chanhacker Wrote: Hey any help would be much appreciated. I have a customer with a 08/2008 build E83 LCI (franekn car) they swapped the mechatronics from a E90 and threw away their original.... issue is ISTA just updates based on UIF which the UIF is wrong for both! the car is a Kline car with a DCAN trans. Im hoping if I do a expertmode flash I can get the kombi and DSC to communicate with it. if someone could share the correct ZUSB that would be great! I tried mapping it with findecu however their is the kkm_SG.txt file in the daten....
VIN is WJ27786
Hi,
just fire up ISTA-P and calculate plan. If HW match you will get proper ZUSB number. Use that number in WinKFP
RE: Needing Help finding ZUSB - that4chanhacker - 17-09-2023
(16-09-2023, 17:20 PM)lustek Wrote:(16-09-2023, 02:11 AM)that4chanhacker Wrote: Hey any help would be much appreciated. I have a customer with a 08/2008 build E83 LCI (franekn car) they swapped the mechatronics from a E90 and threw away their original.... issue is ISTA just updates based on UIF which the UIF is wrong for both! the car is a Kline car with a DCAN trans. Im hoping if I do a expertmode flash I can get the kombi and DSC to communicate with it. if someone could share the correct ZUSB that would be great! I tried mapping it with findecu however their is the kkm_SG.txt file in the daten....
VIN is WJ27786
Hi,
just fire up ISTA-P and calculate plan. If HW match you will get proper ZUSB number. Use that number in WinKFP
Thanks but as stated above it was used the UIF is wrong due to the 0pa that was flashed so ISTA-P only calculated the next in the chain based from the HIS file.... so that wont work for this
RE: Needing Help finding ZUSB - Node - 17-09-2023
AFAI understand E83 is very rudimentary SPdaten and there is no easy way to find ZUSB (at least that I know of) just from the car's data. IMHO ISTA-P should still (maybe probably) do that.
If it can't, then SAME remanufactured gearbox part number 7594330 (which must be according to your VIN) is used on E84 and E93. If you look into mechatronics only (part number 7623882), then there are plenty of car models where it's used. That would be strange!
So maybe we should begin whether the mechatronics you have now is from GM1912 flavour at all???
P.S. I think you SHOULD provide data on what you actually have now in such a question!
RE: Needing Help finding ZUSB - bmchicago - 17-09-2023
here is what i have for this TYPE PC93
WBXPC93499WJ27786
E83N52B30O1 US 194KW
GM6_1912
A7598903.0da 0489T32S600R0FN10
A7593081.0da 0489T32S590R0FN10
A7586453.0da 0489RZ0S450R0FN10
RE: Needing Help finding ZUSB - lustek - 17-09-2023
(17-09-2023, 01:14 AM)that4chanhacker Wrote:(16-09-2023, 17:20 PM)lustek Wrote:(16-09-2023, 02:11 AM)that4chanhacker Wrote: Hey any help would be much appreciated. I have a customer with a 08/2008 build E83 LCI (franekn car) they swapped the mechatronics from a E90 and threw away their original.... issue is ISTA just updates based on UIF which the UIF is wrong for both! the car is a Kline car with a DCAN trans. Im hoping if I do a expertmode flash I can get the kombi and DSC to communicate with it. if someone could share the correct ZUSB that would be great! I tried mapping it with findecu however their is the kkm_SG.txt file in the daten....
VIN is WJ27786
Hi,
just fire up ISTA-P and calculate plan. If HW match you will get proper ZUSB number. Use that number in WinKFP
Thanks but as stated above it was used the UIF is wrong due to the 0pa that was flashed so ISTA-P only calculated the next in the chain based from the HIS file.... so that wont work for this
Hi,
I'm sure that ista-p calculate correct zusb. Istap-p calulate numbers based on vin. I do like that with many used parts and always be good
RE: Needing Help finding ZUSB - bmchicago - 17-09-2023
(17-09-2023, 18:01 PM)lustek Wrote:(17-09-2023, 01:14 AM)that4chanhacker Wrote:(16-09-2023, 17:20 PM)lustek Wrote:(16-09-2023, 02:11 AM)that4chanhacker Wrote: Hey any help would be much appreciated. I have a customer with a 08/2008 build E83 LCI (franekn car) they swapped the mechatronics from a E90 and threw away their original.... issue is ISTA just updates based on UIF which the UIF is wrong for both! the car is a Kline car with a DCAN trans. Im hoping if I do a expertmode flash I can get the kombi and DSC to communicate with it. if someone could share the correct ZUSB that would be great! I tried mapping it with findecu however their is the kkm_SG.txt file in the daten....
VIN is WJ27786
Hi,
just fire up ISTA-P and calculate plan. If HW match you will get proper ZUSB number. Use that number in WinKFP
Thanks but as stated above it was used the UIF is wrong due to the 0pa that was flashed so ISTA-P only calculated the next in the chain based from the HIS file.... so that wont work for this
Hi,
I'm sure that ista-p calculate correct zusb. Istap-p calulate numbers based on vin. I do like that with many used parts and always be good
For E65 and newer will only will calculate correct ZUSB. on vehicles like E83 it does not. ISTA/p for E65 and newer uses factory I-level, vehicle type code and FA to calculate measures plan.
RE: Needing Help finding ZUSB - Node - 17-09-2023
(17-09-2023, 13:04 PM)bmchicago Wrote: here is what i have for this TYPE PC93
WBXPC93499WJ27786
E83N52B30O1 US 194KW
GM6_1912
A7598903.0da 0489T32S600R0FN10
A7593081.0da 0489T32S590R0FN10
A7586453.0da 0489RZ0S450R0FN10
Out of curiosity what is the source for this .0da data?
RE: Needing Help finding ZUSB - bmchicago - 18-09-2023
(17-09-2023, 22:03 PM)Node Wrote:(17-09-2023, 13:04 PM)bmchicago Wrote: here is what i have for this TYPE PC93
WBXPC93499WJ27786
E83N52B30O1 US 194KW
GM6_1912
A7598903.0da 0489T32S600R0FN10
A7593081.0da 0489T32S590R0FN10
A7586453.0da 0489RZ0S450R0FN10
Out of curiosity what is the source for this .0da data?
you can read this data in plain text inside the .0da files
RE: Needing Help finding ZUSB - that4chanhacker - 18-09-2023
(17-09-2023, 13:04 PM)bmchicago Wrote: here is what i have for this TYPE PC93
WBXPC93499WJ27786
E83N52B30O1 US 194KW
GM6_1912
A7598903.0da 0489T32S600R0FN10
A7593081.0da 0489T32S590R0FN10
A7586453.0da 0489RZ0S450R0FN10
Awesome thank you for this, can you also provide me the correct 0pa? the first 2 use 7593220A.0pa but the last one uses 7586031A.0pa I ask because I have to go there and using a icom it constantly has to be redone and its take over 45 minutes a flash and thats if it doesnt fail and I have to redo it.