Solved ✔ BMW E61, can't connect to CHAMP HU with NCS - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: Solved ✔ BMW E61, can't connect to CHAMP HU with NCS (/showthread.php?tid=83355) Pages:
1
2
|
BMW E61, can't connect to CHAMP HU with NCS - GoNz0- - 16-09-2023 I'm doing this over teamviewer, he does have the latest standard tools installed. ISTA does show the HU. When I try to read it in NCS I get the MASK option, not CHAMP, it throws the error coapi-2020 ifh-0009 I found a couple of threads on the interweb with no outcome. The car is standard, he does have a Mr12v DSP installed and I'm trying to activate the CD changer option so it works but as I can't read or write to it, I'm kinda stuck. Any of you geniuses on here have an answer so I can code the bloody thing? Thanks. RE: BMW E61, can't connect to CHAMP HU with NCS - jaramillo - 16-09-2023 Icom , dcan? which interface? RE: BMW E61, can't connect to CHAMP HU with NCS - GoNz0- - 16-09-2023 Just a DCAN but the ones I tell everyone to get, it reads all the other modules without an issue, latency is 1, latest driver, switch either way although with it being a 2008 car it doesn't need pins 7&8 shorting. RE: BMW E61, can't connect to CHAMP HU with NCS - jaramillo - 16-09-2023 You need icom to perform this work RE: BMW E61, can't connect to CHAMP HU with NCS - GoNz0- - 16-09-2023 Ahh bollocks Turns out he is about an hour away, so he is making the trip down as I have ICOM, thanks for the heads up. RE: BMW E61, can't connect to CHAMP HU with NCS - GoNz0- - 17-09-2023 Wondering if you or anyone else knows why it refuses to read just this one module with a DCAN cable? RE: BMW E61, can't connect to CHAMP HU with NCS - Wibbles - 17-09-2023 (17-09-2023, 16:05 PM)GoNz0- Wrote: Wondering if you or anyone else knows why it refuses to read just this one module with a DCAN cable? It's because DCAN cables don't have a big enough buffer to read the ECU's coding file RE: BMW E61, can't connect to CHAMP HU with NCS - GoNz0- - 18-09-2023 Is it worth trying to default code it or will that also fail, and SG_RESET, is that just a reboot command? Thanks again. Just trying to save the guy a trip down the motorway to get on my ICOM if I can. RE: BMW E61, can't connect to CHAMP HU with NCS - Wibbles - 18-09-2023 Sometimes you can code them and it will fail but the coding can take. SG_RESET is the reboot command in NCS. You could send the guy your ICOM and do it remotely RE: BMW E61, can't connect to CHAMP HU with NCS - GoNz0- - 18-09-2023 (18-09-2023, 09:15 AM)Wibbles Wrote: Sometimes you can code them and it will fail but the coding can take. I'd rather he made the hours' drive tbh, if I had a cheap clone I would post it out Thanks for the info, I'll give it one last go tonight. |