+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: BMW F02 480AC1 : Coding data not for hybrid vehicle. (/showthread.php?tid=83387)
BMW F02 480AC1 : Coding data not for hybrid vehicle. - ahmadarifai - 18-09-2023
I have BMW F02 2013 with error "480AC1 : Coding data not for hybrid vehicle." in DSC2.
car stabilization error coming, i read somewhere must update some modules to fix, which modules do i need to update? l already updated DME and DSC2.
RE: BMW F02 480AC1 : Coding data not for hybrid vehicle. - Node - 18-09-2023
Why not just CODE the vehicle PROPERLY? Fault says you coded non-hybrid as hybrid.
RE: BMW F02 480AC1 : Coding data not for hybrid vehicle. - ahmadarifai - 18-09-2023
i did code it properly, this is not the issue
RE: BMW F02 480AC1 : Coding data not for hybrid vehicle. - Node - 18-09-2023
Does not look like you did. Either that or your module is wrong for the car. Or it's firmware. Or something similar.
P.S. You could should share the FA you are using and your SVT... Otherwise I still think you are doing something WRONG. Much higher chance of that than of something else.
RE: BMW F02 480AC1 : Coding data not for hybrid vehicle. - ahmadarifai - 11-10-2023
For the benefit, the car needed update on several modules, i did not do the job but the workshop owner said he updated several modules to fix. the issue is caused by updating DME alone its fixed by updating DSC, and other modules not sure which ones.