+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: Audi A4 B8 BCM 1 clone (/showthread.php?tid=83417)
Audi A4 B8 BCM 1 clone - drinkyboy - 18-09-2023
Hello,
I need help cloning a Audi A4 B8 BCM 1 model from a car that has been flooded.
I successfully read the MPC5607B 1M03Y from car's BCM.
The new used BCM has the same code 8K0 907 063 AH.
I saved all the data from MCU:
DFlash, CFlash, CShadow, Dtest and Ctest.
What do i need to write on the new BCM to make the car work?
After writing the data on BCM i must do anything else to work on car?
Thanks!
RE: Audi A4 B8 BCM 1 clone - -Harry- - 19-09-2023
excuse me, i have no solution, only one question, why?
bcm1 doesn't have much apk or parameters, no immo.
just long coding and removing component protection at audi workshop (car drives with cp active).
RE: Audi A4 B8 BCM 1 clone - mechanior2686 - 19-09-2023
He will simply copy the flash and eeprom from the old one to the new one and it should work, which was done many times even a week ago
RE: Audi A4 B8 BCM 1 clone - Ghitab - 19-09-2023
write Dflash from ori bcm and you are ok.