Vxr needle sweep - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: DASHBOARD (https://cartechnology.co.uk/forumdisplay.php?fid=10) +--- Thread: Vxr needle sweep (/showthread.php?tid=8365) |
Vxr needle sweep - tremo1984 - 23-06-2015 Hi all I'm trying to get needle sweep to work on my astray have I have dumped clocks that have this enabled and am try to work out what code to write in the new epprom done about 10 tests on this so far and am trying to isolate the code to enable it on new clocks any help would be much apreciated thanks jon RE: Vxr needle sweep - Dayo - 03-07-2015 Upload both dumps RE: Vxr needle sweep - tremo1984 - 03-07-2015 Iv hade some strang results with this has been fun, had crazy needles but not got them to sweep properly yet, pm for password mate. RE: Vxr needle sweep - diagtech - 07-07-2015 You want help then password your files mad RE: Vxr needle sweep - tremo1984 - 08-07-2015 Sorry thought they had to passworded RE: Vxr needle sweep - tremo1984 - 13-07-2015 There you go password removed RE: Vxr needle sweep - tremo1984 - 19-07-2015 Just got it working on my test set. RE: Vxr needle sweep - diagtech - 20-07-2015 And will you post before and after dumps thanks RE: Vxr needle sweep - tremo1984 - 21-07-2015 Just used a full dump from the vxr clocks mate and it worked. |