+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: ISPI NEXT TOOL (/showthread.php?tid=8383)
RE: ISPI NEXT TOOL - autoraedarum - 09-07-2015
(08-07-2015, 19:35 PM)hulahans Wrote: Anybody tested expert mode with sangandis version?
I have tried on a S1000RR, Expert mode does not work, if it works on a car, i don`t know
RE: ISPI NEXT TOOL - Bumer86 - 09-07-2015
(08-07-2015, 23:03 PM)KALAS Wrote: Downloadables from ISPI NEXT TOOL, ISTA/D and INSTA/P, are both incompatible with 32 bits systems?
I have seen the Rheingold version runing on a 32 bits system.
I have not tested ISTA/P yet, but ISTA/D works great on 32 Bit System. You only have to start it from the Windows Start Menu, and not from ISPI NEXT Tool.
RE: ISPI NEXT TOOL - joh4nn_123 - 09-07-2015
Thank you for updatet!
Unfortunately get insta-p not to run.
Get an error when I start ista-p as a loader (Appendix 1) Have the error also persists, but is still useable
The second error comes when I ista p not start as a loader (Appendix 2)
What can it be?
RE: ISPI NEXT TOOL - hojo29 - 09-07-2015
Very good job @Sangandi
But please check the times of 2.56.0 and 2.56.1 Registry.
Since the new tool, the entries are duplicated. And if you start over tool ISTA / P, the display no longer in full-screen. If you then open the file TaurusClientConfig.xml the setting is the same again.
If you change the setting again and starts ISTA / P not the tool but via the normal ICON the ad saved
RE: ISPI NEXT TOOL - winter - 09-07-2015
(09-07-2015, 09:48 AM)joh4nn_123 Wrote: Thank you for updatet!
Unfortunately get insta-p not to run.
Get an error when I start ista-p as a loader (Appendix 1) Have the error also persists, but is still useable
The second error comes when I ista p not start as a loader (Appendix 2)
What can it be?
for figure 1: .net framework 4.5.2 must be first installed.
for figure 2: you must shut off WiFi and LAN cable connected.
RE: ISPI NEXT TOOL - amdBMW - 10-07-2015
Hi everyone,
I have downloaded files and now when I am installing (ISTA/P) and I am getting this error: (see the screen shot).
Thnx,
AmdBMW
RE: ISPI NEXT TOOL - Napalm - 11-07-2015
Will the ISPI NEXT/ISTA-P run on SSD drive, or just on HDD?
RE: ISPI NEXT TOOL - IM6 - 11-07-2015
Sangandi
Really great work
bravo
RE: ISPI NEXT TOOL - fabulous - 11-07-2015
(11-07-2015, 00:52 AM)Napalm Wrote: Will the ISPI NEXT/ISTA-P run on SSD drive, or just on HDD?
Yes it run on both but much faster on SSD drive.
RE: ISPI NEXT TOOL - z00m0 - 11-07-2015
Can i install whole ista on other drive than C:/ ? Will it work ?