F11 NBT to NBT_EVO retrofit problem - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: F11 NBT to NBT_EVO retrofit problem (/showthread.php?tid=83903) |
F11 NBT to NBT_EVO retrofit problem - brzoza750 - 01-10-2023 Hi guys, have some problem with my nbt evo retrofit in my F11, I put a NBT_EVO from G11 with GPS plug, I have original apix1 CID form NBT F11, i coded it to APIX1 but have black screen, when i activate in launch screen activation i will see a image on CID, but when i restart unit it will still black. Can anyone help me with code NBT_EVO to work well on EVO CID? Also controler form EVO F11 not work i will pay for help. Thanks RE: F11 NBT to NBT_EVO retrofit problem - user_530d - 01-10-2023 You are sure your ilevel on head-unit is not higher than 18-03-532. This is last one for apix1 functional. In your cafd you can change CID_DISPLAY_SIZE to 10_25 Your controller from picture doesn't work on EVO. RE: F11 NBT to NBT_EVO retrofit problem - brzoza750 - 01-10-2023 (01-10-2023, 11:47 AM)user_530d Wrote: You are sure your ilevel on head-unit is not higher than 18-03-532. This is last one for apix1 functional. This is controler from my OE car EVO hu, with one i need to buy? RE: F11 NBT to NBT_EVO retrofit problem - masa52 - 01-10-2023 (01-10-2023, 12:15 PM)brzoza750 Wrote:(01-10-2023, 11:47 AM)user_530d Wrote: You are sure your ilevel on head-unit is not higher than 18-03-532. This is last one for apix1 functional. ZBE4 or ZBE3 working too RE: F11 NBT to NBT_EVO retrofit problem - brzoza750 - 01-10-2023 Any idea how to code me EVO to work well? Few common problems; Controller not work, Sterring buttons not work, Screen wont automaticly on... RE: F11 NBT to NBT_EVO retrofit problem - kola - 02-10-2023 Code this and check controller RE: F11 NBT to NBT_EVO retrofit problem - user_530d - 02-10-2023 ZBE_LOW has nothing to do with controller version like ZBE, ZBE2, ZBE3, ZBE4 ZBE_LOW is for L7 or L6 Entry HU RE: F11 NBT to NBT_EVO retrofit problem - kola - 02-10-2023 Then he must change zbe to minimum zbe3. Send me pm evening, i should have some zbe3 and zbe4. Tell us also car year, you use emulator / adapter? RE: F11 NBT to NBT_EVO retrofit problem - zero9 - 02-10-2023 Question someone should ask, is he pinned controlled CAN wires correctly? Or he had CIC before and he have left wires originally as was... RE: F11 NBT to NBT_EVO retrofit problem - brzoza750 - 03-10-2023 My controler form f11 NBT works well with NBT EVO, the problem was in software from 2015year in EVO, software update to 18-03-xxx help with all issue. Thanks for any sugestions |