ISTA problem with session preview - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: ISTA problem with session preview (/showthread.php?tid=84259) |
ISTA problem with session preview - maksymw - 11-10-2023 Hello For some time now, after ISTA update, I have had a problem with viewing the completed session. Even without a connection to the car, I was always able to open a session that I had previously ended correctly. Now I have a message like the one in the photo attached. Can anyone help? Thank you very much. RE: ISTA problem with session preview - 2013m5 - 11-10-2023 Caused by "Just disconnected the iCOM and NOT closed session." . Your prior session is still open and running in the background. . Did you try to select new session #2 or #3? RE: ISTA problem with session preview - maksymw - 11-10-2023 I tried, with no result. After diagnosing the car, I also close the sessions properly. I've never had this problem. Is this a problem in the latest version of ISTA? RE: ISTA problem with session preview - tonemoz - 11-10-2023 Yeah, happens with official version too... RE: ISTA problem with session preview - maksymw - 12-10-2023 Really no one knows how to solve the problem? RE: ISTA problem with session preview - maksymw - 12-12-2023 BUMP Has anyone found a solution to the problem of opening a terminated session? RE: ISTA problem with session preview - Nygel - 12-12-2023 ista has been doing that lately, why, many have no clue. If you look at the top left you will be on the second session for vehicle readout. Just click close and it will close the one you on but you will have to click active then close(even if you have nothing running) then click on the X shut down. Mine has been doing that since 4.40.1x RE: ISTA problem with session preview - Node - 12-12-2023 (12-12-2023, 18:44 PM)Nygel Wrote: ista has been doing that lately, why, many have no clue. If you look at the top left you will be on the second session for vehicle readout. Just click close and it will close the one you on but you will have to click active then close(even if you have nothing running) then click on the X shut down. Mine has been doing that since 4.40.1x You are talking about a TOTALLY different issue. Which you should raise with the provider of your ISTA/licenses. RE: ISTA problem with session preview - Node - 12-12-2023 (12-12-2023, 16:22 PM)maksymw Wrote: BUMP What answer do you expect??? Latest ISTAs are made that way if session is complete, you can't reopen it! |