CarTechnoloGY
Solved ✔ ABS Assembly mode active - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: Rover - Land Rover - Range Rover (https://cartechnology.co.uk/forumdisplay.php?fid=74)
+---- Thread: Solved ✔ ABS Assembly mode active (/showthread.php?tid=84282)



ABS Assembly mode active - Yah - 11-10-2023

Hello,
Im having an issue with a Range Rover Velar MY2022, where the wheels where rotating in a lift while the ignition was ON, after that now the Engine doesnt start and Im having lots of errors with ABS Module.
We tried to clear errors with Launch tablet, but it is not possible to clear.
Tried with battery off for more than 10 minutes but still the same.
Attached is the picture of the errors we have.
If you have any suggestion, would be appreciated. 
Thank you!


RE: ABS Assembly mode active - m1ke - 12-10-2023

Check in launch tablet is there routine/function for reset service mode for park brake and brakes?


RE: ABS Assembly mode active - Yah - 13-10-2023

Thank you!
Wasn't communicating with rear park brake until we mechanically release park brake in both side and we rotate the rear wheels by hand and after that the engine started.